Visioneer Strobe XP 470 User Manual page 76

3. Select the scan configuration Configure Before Scan.
Click the arrows to
select the button.
Select Configure
Before Scan.
Right-click on Configure
Before Scan to get the
menu, and choose the
interface to use for
configuring.
4. Right-click on Configure Before Scan and choose an interface to
use for configuring before scanning.
TWAIN—The Basic Interface or Advanced Interface appears for
you to configure the scanning. See "Scanning from the Basic
Interface or Advanced Interface" on page 96.
VirtualReScan—The Kofax VRS TWAIN interface appears for
you to configure the scanning.
ISIS—The ISIS Scan interface appears for you to configure the
scanning.
WIA—The Windows Image Acquisition Interface (WIA) appears
for you to configure the scanning. See "Scanning with the Windows
Image Acquisition" on page 119.
Note: The WIA option is only available if your computer is running
Microsoft Windows XP or Me.
5. Click OK or Apply on the OneTouch Properties window.
C O T
ONFIGURING THE NE
B 69
OUCH UTTONS