Configuring The Onetouch Buttons - Visioneer PATRIOT 430 - FOR WINDOWS User Manual

C
When you first connect your scanner to a computer, the scanner's software
configures each button with appropriate settings. Each OneTouch button
configuration consists of a Destination Application, a Scan
Configuration, and a Document Format. The OneTouch Properties
window is where you select these three elements for a button.
To open the OneTouch Properties window:
1. Click the OneTouch icon. It is located in the Windows Notification
2. Right-click a button on the OneTouch Button Panel.
Right-click on a button (for example, button 2)
and the Properties window opens for that button.
Note: Some of the options on the OneTouch Properties window (and
other OneTouch windows and dialog boxes) are "grayed out" and are not
available. Grayed out options are not appropriate for your Visioneer
Patriot 430 scanner.
ONFIGURING THE
Area at the bottom right corner of the screen.
The OneTouch Properties window opens for that button.
The OneTouch Properties window also opens when you press, hold
down, and release the Simplex or Duplex button on the scanner.
C
ONFIGURING THE
O T B
NE OUCH UTTONS
O T B
NE OUCH UTTONS
25