Visioneer Strobe XP 470 User Manual page 68

7. Click the Page Settings tab to select page settings.
Size—Click Standard, click the menu arrow and choose a page size
from the list, or click Custom and enter the horizontal and vertical
page dimensions in the boxes. The maximum size is 8.5" x 14". The
units of measurement can be inches or centimeters. Click the name
of the units, inches or centimeters, to toggle between them.
Improvements and Settings—Only the options that apply to the
selected Destination Application are available.
AutoCrop to Original—Select this option to let the scanner
■
automatically determine the size of the item being scanned. For
example, if you scan a 5 by 7 inch photo, the scanner will
determine the size of the photo.
When using the AutoCrop to Original option, always use the paper
guides on the scanner so the page is not skewed. Skewed pages may not
scan properly.
For single-sided scans, the scan area is the size of the image. For
double-sided scans, the scan area is the size of the larger of the two
areas on the front and back of the page.
Straighten Image—Select this option to let the scanner
■
automatically determine if a page is skewed, and then straighten its
image. The scanner detects page edges and can sense when the
page is fed through at an angle. However, if the page is fed through
C O T
ONFIGURING THE NE
B 61
OUCH UTTONS
Click to toggle
between inches
and centimeters.