About The Onetouch Properties Window - Visioneer Strobe XP 470 User Manual

36 V S
ISIONEER TROBE
The button number
and name.
The Destination
Application. This is
the application that
opens when you are
finished scanning.
XP 470 S U '
CANNER SER S
A O T
BOUT THE NE OUCH
The OneTouch Properties window is where you can select new settings
for the buttons. The OneTouch Properties window also has special
scanning features such as scanning to a CD, scanning and converting
text directly into an HTML web page, and scanning with optical
character recognition (OCR) that turns a scanned image into text that
you can edit.
Note: Some of the options on the OneTouch Properties Window
(and other OneTouch windows and dialog boxes) are "grayed out"
and are not available. Grayed out options are not appropriate for your
Visioneer Strobe XP 470 scanner. For example, on the figure below,
the option "Use Document Feeder" is selected and "grayed out"
because the Visioneer Strobe XP 470 is an ADF scanner and always
uses the document feeder, so there's no reason for you to select it. If
you use the OneTouch application with other Visioneer scanners,
grayed out options become active, if appropriate.
The following example of the OneTouch window shows the settings for
Button 2. The button is set to scan with the scan configuration named
Color Document and then open ScanSoft PaperPort to display the
scanned image. The Format and Page(s) option is set to scan in the PDF
image format.
G
UIDE
P W
ROPERTIES INDOW
Click to select
options.
The file format of
the images of the
scanned item.
The settings that the
scanner uses when
scanning with the
currently selected
button (in this case
button 2).