Status Light Troubleshooting Codes - Visioneer Strobe XP 470 User Manual

S L T
TATUS IGHT ROUBLESHOOTING
A green status light indicates the normal state of the scanner.
N O
ORMAL PERATION
Blinking green: indicates the scanner is waking up from power
■
saving and preparing to scan.
Steady green: indicates the scanner is ready to scan.
■
E C
RROR ODES
If your scanner experiences hardware problems, the status light will
blink red, and the LED flashes an "E" and the error code number.
The LED blinks back and forth
between "E" and the error code
number (such as 6).
The red light flashes the number
of times as the error code (6 in
this example).
The table below describes the error codes.
T
ROUBLESHOOTING
C
ODES
129