Visioneer Strobe XP 470 User Manual page 39

32 V S
ISIONEER TROBE
XP 470 S U '
CANNER SER S
2. To scan from the panel, click the icon you want to use to scan.
3. To see the details for a button, right-click on it. The Properties
window for that button also appears.
Right-click on a button to see its details in
the Detail View and Properties Window.
Clicking the icon in either view starts the
scanner scanning using the button's settings.
4. To cycle through the nine buttons, click the arrows on the right side
of the panel.
5. To navigate through the panel's three views, click the green arrows
at the top of the panel.
Click these arrows
to navigate through
the panel's three
views.
The Hardware View
The Button View is your main scanner control panel. Use it to
■
scan or to see all nine buttons.
The Detail View shows the current scan settings for a button.
■
G
UIDE
Click these arrows to cycle
through the 9 buttons.
The Button View The Button View
The Detail View
The Detail View