Obtaining An Ip Address Via Dhcp Server; Specifying An Ip Address - Unitech PA970 User Manual

Obtaining an IP Address via DHCP Server

Please check with your MIS department to determine whether a DHCP server is available in your
LAN environment. If available, tap the radio button Obtain an IP address via DHCP, and then tap
the OK button.

Specifying an IP Address

If there is no DHCP server in your LAN environ-
ment, specify the individual IP address on each
PA970 with the following steps:
• Tap the radio button Specify IP Address
• Input the proper IP address, Subnet Mask, and
Default Gateway
• Tap the Name Servers tab, and then input the
proper Primary DNS, Secondary DNS, Primary
WINS, and Secondary WINS
To avoid conflict with your LAN environment, please consult with your MIS department for the
correct TCP/IP setting.
To change the above settings, please perform the
following steps:
• Tap Start, Control Panel
• Double tap the Network icon
• Select the proper RF card driver and then tap
the Properties button
34
PA970 User's Manual