Using The Stylus; Protective Screen Film; First Operation Of The Pa970; Pressing The On/Off Key - Unitech PA970 User Manual

Using the Stylus

Never use anything other than the PA970's stylus on the screen.
CAUTION:
Using another object as a stylus could cause permanent damage.
1. Hold the stylus as you would a pencil.
2. To make a choice from a menu, lightly tap the tip of the stylus on
that choice.
3. To write data into a field on a form, use the stylus to print the letters
or numbers. Use very light pressure.

Protective Screen Film

The PA970 screen ships with a protective plastic film. You may remove this if desired by peeling
from one corner. The screen will be more susceptible to scratching without the film, but will be more
readable, and the touchscreen will work better.
First Operation of the Unitech PA970
Press the ON/OFF Key
The Unitech PA970 welcome screen appears. The Windows CE
will appear shortly thereafter.
Adjust Screen Brightness
Press [FUNC] key and Cursor key to increase or increase screen brightness.
Calibrate the PA970
This screen will automatically appear when the unit is powered-on for the
first time or after the system is reset. This screen can also be accessed
at any time by pressing the hot key [FUNC] and the [ESC] key.
The PA970 will prompt you to calibrate the unit by tapping a sequence of
screen locations. Tap gently but firmly. When you have completed the
series of taps, press the [ENT] key to confirm it or press the [ESC] key to
cancel it.
6
PA970 User's Manual
®
screen