Setting Ctcss Codes - Uniden MHS550 Owner's Manual

names, use ▲ or ▼ to highlight Default All located
between Channel 88
highlight Yes then press ENTER to restore all the
original names. A double beep sounds to confirm the
action.
. To restore only one name to default, highlight the
channel by using ▲ or ▼then press ENTER. Then
use ▲ or ▼ to next highlight Default.

Setting CTCSS Codes

[FRS Band Only]
If you encounter interference
from another FRS radio while
using the FRS band, enabling
one of the 14 CTCSS codes
may prevent that interference.
1. With the FRS band
operational, momentarily
press MENU.
Use ▲ or ▼ to scroll to CODE.
.
3. Press ENTER. The currently used FRS channel is highlight-
ed. To select a different channel, press either ▲ or ▼
FRS CODE FRS CODE
Channel 09 Channel 09
Channel 10 Channel 10
Channel 11 Channel 11
Press ENTER to choose it. You can select ON, OFF,
4.
or EXIT, next.
Use ▲ or ▼ to choose ON (to associate a CTCSS
5.
Uniden MHS550 Radio Owner's Manual
and Exit. Use ▲ or ▼ to
A
FRS MENU FRS MENU
CODE CODE
Lamp Adjust Lamp Adjust
Contrast Contrast
CHANNEL 10-OFF CHANNEL 10-OFF
On On
Off Off
Exit Exit
41