Operation - Fm Band; Operation - Aircraft Band - Uniden MHS550 Owner's Manual

Note: AM broadcasts are subject to interference from many
outside sources, as well as weather disturbances. The signal
strength and atmospheric conditions can also play a part in
reception.

Operation - FM Band

1. Momentarily press
BAND/1/2.5/5W to
switch to the FM band.
. Press either ▲ or ▼ to
select a local FM station.
The default (USA) step option
is 00MHz per press of either
the ▲ or ▼ key. To change to 100MHz steps, see Page 43.
If selected, Europe replaces USA in the upper right corner of
the LCD.
Note: Typical FM broadcasts rarely reach more than 30
miles from the transmitter and terrain may also be a factor.

Operation - Aircraft Band

1. Momentarily press
BAND/1/2.5/5W to
change to the aircraft
band.
. Press either ▲ or ▼
to select a channel.
Hold down either key to
change frequencies rapidly.
• The default aircraft step option is 5KHz steps per press of
either the ▲ or ▼ key.
• After holding ▲ for more than a second, if you release it,
the radio will scan all frequencies until it finds a signal, and
will stay on that frequency.
Uniden MHS550 Radio Owner's Manual 33