Accessing The Menus; Usa/Can/Int (U.i.c.) - Uniden MHS550 Owner's Manual

Accessing the Menus

To access the menu selections for each band, change to that
band and press MENU. To exit a menu for any band, press
MENU again or use ▲ or ▼ to scroll to EXIT on that menu.
Then press ENTER to return to the previous screen.
Note: if during any of the following operations you fail to
press a key or make a selection in more than 30 seconds,
the radio returns to standard marine mode. Each band has
several menu options in common while other choices are
specific to that band. The option order for each band is:
Marine Marine
VHF/WX VHF/WX
USA/CAN/INT USA/CAN/INT
Lamp Adjust Lamp Adjust
Contrast Contrast
Dual or Tri Dual or Tri
Watch Watch
Key Beep Key Beep
FIPS Codes FIPS Codes
Channel Channel
Name Name
Exit Exit

USA/CAN/INT (U.I.C.)

[Marine Band Only]
The radio is set as a factory default
to the USA channel frequencies. To
change to either Canadian [CAN] or
International [INT] channels follow
these steps.
1. Press either ▲ or ▼ until you
Uniden MHS550 Radio Owner's Manual
FRS FRS AM AM
CODE CODE
Lamp Lamp Lamp Lamp
Adjust Adjust Adjust Adjust
Contrast Contrast Contrast Contrast
Dual or Dual or
Tuning Tuning
Tri Tri
Steps Steps
Watch Watch
Key Key Key Key
Beep Beep Beep Beep
Exit Exit Exit Exit
FM FM Aircraft Aircraft
Lamp Lamp Lamp Lamp
Adjust Adjust Adjust Adjust
Contrast Contrast Contrast Contrast
FM FM
Muting Muting
Tuning Tuning
Steps Steps
Key Key Key Key
Beep Beep Beep Beep
Exit Exit Exit Exit
UIC CHANNELS UIC CHANNELS
USA Mode USA Mode
Canadian Mode Canadian Mode
Intl Mode Intl Mode
Exit Exit
35