MSI 865GM2-LS - Motherboard - Micro ATX User Manual page 69

MS-6743 M-ATX Mainboard
Run VGABIOS if S3 Resume
When ACPI Suspend Mode is set to S3 or S1&S3, users can select the options
in this field. Selecting [Yes] allows BIOS to call VGABIOS to initializet he
VGA card when system wakes up (resumes) from S3 sleep state. The system
resume time is shortened when you disable the function, but system will need
an AGP driver to initialize the VGA card. Therefore, if the AGP driver of the
card does not support the initialization feature, the display may work abnor-
mally or not function after resuming form S3. Options: Auto, Yes, No.
Power Management
This item is used to select the degree (or type) of power saving and is related
to these modes: Suspend Mode and HDD Power Down. There are three op-
tions for power management:
Min Saving
Max Saving Maximum Power Management. Suspend Mode=1 Min
User Define Allows end users to configure each mode separately.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank
Blank Screen
DPMS
Video Off In Suspend
This option enables the monitor to be turned off during the suspend mode.
Settings: Yes, No.
Suspend Type
This item allows you to select he suspend type for system power management.
Settings: Stop Grant, PwrOn Suspend.
MODEM Use IRQ
This determines the IRQ in which the MODEM can use. Activity of the se-
lected IRQ always awakens the system. Settings: 3, 4, 5, 7, 9, 10, 11, NA.
3-24
Minimum Power Management. Suspend Mode=1 Hour
This selection will cause the system to turn off
the vertical and horizontal synchronization ports
and write blanks to the video buffer.
This option only writes blaniks tot he video
buffer.
Initial display power management signaling.