MSI 865GM2-LS - Motherboard - Micro ATX User Manual page 55

MS-6743 M-ATX Mainboard
MSI Reminds You...
Enabling the functionality of Hyper-Threading Technology for
your computer system requires ALL of the following platform
Components:
*CPU: An Intel
*Chipset: An Intel
*BIOS: A BIOS that supports HT Technology and has it enabled;
and
*OS: An operating system that supports HT Technology.
For more information on Hyper-threading Technology, go to:
www.intel.com/info/hyperthreading
1st/2nd/3rd Boot Device
The items allow you to set the sequence of boot devices where BIOS attempts
to load the disk operating system. The settings are:
Floppy
LS120
HDD-0
SCSI
CDROM
HDD-1
HDD-2
HDD-3
ZIP100
USB-FDD
USB-ZIP
USB-CDROM
USB-HDD
LAN
Disabled
MSI Reminds You...
Available settings for "1st/2nd/3rd Boot Device" vary depend-
ing on the bootable devices you have installed. For example, if
you did not install a floppy drive, the setting "Floppy" does not
show up.
3-10
® ®
Pentium 4 Processor with HT Technology;
®
Chipset that supports HT Technology;
The system will boot from floppy drive.
The system will boot from LS-120 drive.
The system will boot from the first HDD.
The system will boot from the SCSI.
The system will boot from the CD-ROM.
The system will boot from the second HDD.
The system will boot from the third HDD.
The system will boot from the fourth HDD.
The system will boot from ATAPI ZIP drive.
The system will boot from USB-interfaced floppy drive.
The system will boot from any USB-interfaced ATAPI
ZIP drive
The system will boot from the USB-interfaced CD-ROM.
The system will boot from the USB-interfaced HDD.
The system will boot from the Network drive.
Disable this sequence.