MS-6743 M-ATX Mainboard
Onboard Super IO Device
Press <Enter> to enter the sub-menu and the following screen appears:
POWER ON Function
This controls how the PS/2 mouse or keyboard can power on the system.
Settings: Password, Hot KEY, Mouse Left, Mouse Left, Mouse Right, any
KEY, BUTTON ONLY, Keyboard 98.
KB Power ON Password
If POWER ON Function is set to Password, then you can set a password
in the field for the PS/2 keyboard to power on the system.
Hot Key Power ON
If POWER ON Function is set to Hot KEY, you can assign a hot key
combination in the filed for the PS/2 keyboard to power on the system.
Settings: Ctrl-F1 through Ctrl-F12.
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDD) in-
stalled on the system board and you wish to use it. If you install add-on
FDC or the system has no floppy drive, select Disabled in this field. The
settings are: Enabled and Disabled.
3-20