ekwb EK-Quantum Vector3 TUF RTX 5090 User Manual page 2

This product is intended for installation only by expert users. Please
consult with a qualified technician for installation. Improper installation
may result in damage to your equipment. EK Water Blocks assumes no
liability whatsoever, expressed or implied, for the use of these
products, nor their installation. The following instructions are subject to
change without notice. Please visit our website at www.ekwb.com for
updates. Before installation of this product, please read important
notice, disclosure, and warranty conditions that are printed on the back
of the box.
Before you start using this product, please follow these basic
guidelines:
Please carefully read the manual before beginning the
installation process.
The EK Fittings require only a small amount of force to screw
them firmly in place since the liquid seal is ensured by the rubber
O-ring gaskets.
The use of corrosion inhibiting coolants is always recommended
for liquid cooling systems, and mandatory for nickel plated water
blocks.
Do not use pure distilled water! For best results EK
recommends theuse of EK-Cryo Fuel coolants.
Make sure to thoroughly bleed air out of your water block, or
you will not reach optimal performance.
- 2 -