Liko FlexoStretch
Accessory
Instructions for Use
FlexoStretch
Prod. No. 3156057
Intended Use:
FlexoStretch accessory is intended for lifting and transferring
patients in a horizontal supine position. The width of
the stretcher can be adjusted between 70 and 95 cm
(27.5‑35.4 in.), by pulling the lift arms either out or in.
FlexoStretch accessory is equipped with a Stretch Leveller to
make it easy to control the center of gravity during the lift.
It is intended for use in following environments: Health care,
Intensive care, Emergency ward, Rehabilitation, Habilitation
and Home healthcare environment.
In this document, the person being lifted is referred to as the patient, and the person helping is referred to as the caregiver.
IMPORTANT!
Lifting and transferring a patient always involves a certain level of risk. Read the instructions for use for both the patient
lift and lifting accessories before use. It is important to completely understand the contents of the instructions for use.
The equipment should only be used by a trained caregiver. To be trained, a caregiver needs to read and understand the
Instructions for Use. Ensure that the lifting accessories are suitable for the lift used. Exercise care and caution during use.
As a caregiver, you are always responsible for the patient's safety. You must be aware of the patient's ability to make it
through the lifting situation. If something is unclear, contact the manufacturer or supplier.
7EN160176 Rev. 6
ENGLISH 2024
Product Description
Patient Support:
Use the LiftSheet XL to support the patient.
Suitable Lifts:
The FlexoStretch accessory can be used with:
• LikoGuard overhead lift.
• Likorall overhead lift.
• Multirall overhead lift.
• Viking L and Viking XL mobile lifts.
• Golvo mobile lift.
Need help?
Do you have a question about the FlexoStretch and is the answer not in the manual?
Questions and answers