Page 2
Components (manufacturing parts) are not available after last manufacturing date. Repairs and maintenance may only be performed by personnel authorized by Hill-Rom and using original Liko spare parts. ™ For information regarding Service and Maintenance education, contact your Hill-Rom representative.
2000 1360 1350 900 660-960 550-950 1060 1420 Viking L 75/100 1780 1990 1350 1350 900 660-960 550-950 1050 1420 * Standard for Viking L. Maximum load and weight in lbs. Measures in inches. Model Wheel Max. Weight Weight Turning diameter...
Note: The measurements are based on the lift being equipped with standard sling bar and standard wheels. When changing to other lifting accessories,or other wheels, check that the lift still achieves desired lifting height. Reference measurement according to Standard EN ISO 10535:2006. Service Manual Viking™L • 3EN360401 Rev. 10 www.hill-rom.com www.liko.com mobile lift...
Technical Data Prod. No. 2040034 Electrical data: 24 V Maximum load: Viking L: 250 kg (550 lbs) Intermittent Int. Op 10/90, active operation Material: Aluminium power: max 2 min. Only 10% of a given Weight: Total weight: 37,4 kg (82.5 Ibs)
(marked) to safely lower the patient (p. 7). 4. Check that the battery is charged. 5. If the lift still does not work satisfactorily, contact Liko/Hill-Rom. If you hear unusual sounds. Contact Liko/Hill-Rom. Service Manual Viking™L • 3EN360401 Rev. 10 www.hill-rom.com www.liko.com...
7. If the lift motion is stopped during raising maximum load, and then won’t raise, try to lower the lift and then raise again. 8. If the problem persists, please contact Liko/Hill-Rom. The lift does not work up/down with the 1.
4. Check that the hand control cable is correctly connected. 5. If the lift works via the operation panel, change the Hand Control. 6. If the problem persists, please contact Liko/Hill-Rom. The lift does not work up/down 1. Check that the emergency stop button has not been pressed.
- If charging starts within 1 minute, charge and then continue to step 6. - If charging doesn´t start, continue to step 5b. www.liko.com 5b) Measure output voltage on the control box 5 on contact 1 and 3. eries are fully charged, the charger switches - If voltage is 3-4V charging is OK! Replace the battery, continue to step 6.
NAME UNIT There are three models of Viking L; Prod. No. 2040004, 2040014 and 2040034. Which spare part that fits to each model, can be read in the columns to the right. (x=fits with this model) Viking L Control Units 2040004 2040014 2040034 PROD.
Page 13
To S/N 7200488. 20490008 Overhead Beam Restoration set To S/N 7200488 20490010 Locking Handle Viking XL pair from S/N 7200431 20090050 Cable for Charging, AU/NZ Service Manual Viking™L • 3EN360401 Rev. 10 www.hill-rom.com www.liko.com mobile lift Spare Parts List www.hill-rom.com www.liko.com...
Page 14
Lift arm plastic cover Prod. No. 2040004, from S/N 7200795 20490024 Overhead beam restoration set Prod. No. 2040004, from S/N 7200795 20490025 Actuator Viking L, XL 31590014 Latch, composite pair Fits Universal SlingBar from S/N 1299511 Service Manual Viking™L • 3EN360401 Rev. 10 www.hill-rom.com...
Page 15
Charge cable hook , 10 pce 21090023 Hand control hanger, 10 pce 20490037 Rear Wheel fork pair 20090077 Locking device CBL20, 10 pce 20490040 Bracket Cover Service Manual Viking™L • 3EN360401 Rev. 10 www.hill-rom.com www.liko.com mobile lift Spare Parts List www.hill-rom.com www.liko.com...
Page 16
Leg Cover L&XL 20490049 Flexlink 20090080 Fork locking attachment, 4 pair 20090081 Wheel Fork pair 20490052 SlingBar Assembly set 20490057 Locking Ring CBL 10 pce Service Manual Viking™L • 3EN360401 Rev. 10 www.hill-rom.com www.liko.com mobile lift Spare Parts List www.hill-rom.com www.liko.com...
- Make sure the spare part is mounted according to the assembly instruction. - Check all functions related to the changed spare part. Repairs and maintenance may only be performed by personnel authorized by Hill-Rom/Liko and using original Liko spare parts. www.liko.com Service Manual Viking™L...
- Make sure the spare part is mounted according to the assembly instruction. - Check all functions related to the changed spare part. Repairs and maintenance may only be performed by personnel authorized by Liko/Hill-Rom and using original Liko spare parts. www.liko.com Service Manual Viking™L...
- Make sure that the spare part is approved for the lift, and that it is mounted according to the assembly instruction. - Check all functions related to the changed spare part. Repairs and maintenance may only be performed by personnel authorized by Hill-Rom/Liko and using original Liko spare parts. www.liko.com Service Manual Viking™L...