Components (manufacturing parts) are not available after last manufacturing date. Repairs and maintenance may only be performed by personnel authorized by Hill-Rom and using original Liko™ spare parts. For information regarding Service and Maintenance education, contact your Hill-Rom representative. For contact information please visit our website: www.hill-rom.com...
The lifting interval 1260 mm (49.6 in) is height-adjustable, see p. 9. Note: When changing to other lifting accessories check that the lift still achieves desired lifting height. * Reference measurement according to Standard EN ISO 10535:2006 Service Manual Golvo™ 8000/8008 • 3EN400404 Rev. 6 www.liko.com www.hill-rom.com Mobile Lift...
Note: When changing to other lifting accessories check that the lift still achieves desired lifting height. * Reference measurement according to Standard EN ISO 10535:2006. Service Manual Golvo™ 8000/8008 • 3EN400404 Rev. 6 www.liko.com www.hill-rom.com Mobile Lift w w w . l i k o . com...
Int. Op 10/90, active operation max 2 min. operation: Only 10% of a given length of time may Weight: Golvo 8000 Classic: 39 kg (86 Ibs) be active, yet no more than 2 min. Golvo 8008 Classic: 41 kg (90 Ibs) Battery: NiMH cells, 2.2 Ah.
Lift motor: 24 V, 8.2 A with brakes. Motor for base- Turning diameter Golvo 8000: 1240 mm (49 in) width adjustment: 24 V, 5.5 A Golvo 8008: 1330 mm (52 in) Golvo 8008 LowBase: 1330 mm The device is intended for use indoors.
4. Make sure that the cables to the control box are connected correctly. 5. Check that the battery’s contact plates are not defective or broken. 6. If the problem remains, please contact Liko/Hill-Rom. The charger doesn’t work. 1. Make sure that the emergency stop has not been activated.
4. Check that the hand control cable is correctly connected. 5. If the lift works via the operation panel, change the Hand Control. 6. If the problem persists, please contact Liko/Hill-Rom. The lift does not work up/down 1. Check that the emergency stop button has not been with the operation panel.
Check to ensure that battery contact plates in the hand control are not defective or broken. - There´s no charging function? a) Verify contact between control box and battery. Perform step 4. b) Check charging function. Perform step 5. Service Manual Golvo™ 8000/8008 • 3EN400404 Rev. 6 www.liko.com www.hill-rom.com Mobile Lift...
- Make sure the spare part is mounted according to the assembly instruction. Document Number - Check all functions related to the changed spare part. - Repairs and maintenance may only be performed by personnel authorized by Hill-Rom and using original Liko™ spare parts. 3EN650203 Rev. 5 ENGLISH www.hill-rom.com...
Spare Parts 5.0 Spare Parts List Golvo™ 8000/8008 mobile lift (G7=Golvo 7000, G77=Golvo 7007, G8=Golvo 8000, G88=Golvo 8008, G9=Golvo 9000) PROD. NO. POS. NO. NAME UNIT ASSEMBLY INSTR. Golvo LiftStrap 20090018 Lift Strap G7 / G8 3SE650272 Grey strap and grey plastic details...
Page 14
Spare Parts 5.0 Spare Parts List Golvo™ 8000/8008 mobile lift (G7=Golvo 7000, G77=Golvo 7007, G8=Golvo 8000, G88=Golvo 8008, G9=Golvo 9000) PROD. NO. POS. NO. NAME UNIT ASSEMBLY INSTR. Golvo Spare Parts 20090094 Middle Beam 7000/8000 3EN690271 (motor not included) 3EN690272...
Page 15
Spare Parts 5.0 Spare Parts List Golvo™ 8000/8008 mobile lift (G7=Golvo 7000, G77=Golvo 7007, G8=Golvo 8000, G88=Golvo 8008, G9=Golvo 9000) PROD. NO. POS. NO. NAME UNIT ASSEMBLY INSTR. 20090041 Spring Magazine 3EN630214 20390006 Fork Cover pair 3SE380202 20090050 Cable for Charging AU/NZ...
Page 16
Spare Parts 5.0 Spare Parts List Golvo™ 8000/8008 mobile lift (G7=Golvo 7000, G77=Golvo 7007, G8=Golvo 8000, G88=Golvo 8008, G9=Golvo 9000) PROD. NO. POS. NO. NAME UNIT ASSEMBLY INSTR. 20090066 End Cover Handle/Arm Support grey, 4 pce 3SE630271 20090067 End Cover Armrest, grey...
Page 17
Spare Parts 5.0 Spare Parts List Golvo™ 8000/8008 mobile lift (G7=Golvo 7000, G77=Golvo 7007, G8=Golvo 8000, G88=Golvo 8008, G9=Golvo 9000) PROD. NO. POS. NO. NAME UNIT ASSEMBLY INSTR. 20090074 Limit switch box 3SE630266 20090076 Limit Switch PCBA 3SE630287 20090077 Locking device CBL20, 10 pce...
Page 18
Spare Parts 5.0 Spare Parts List Golvo™ 8000/8008 mobile lift (G7=Golvo 7000, G77=Golvo 7007, G8=Golvo 8000, G88=Golvo 8008, G9=Golvo 9000) PROD. NO. POS. NO. NAME UNIT ASSEMBLY INSTR. 20490057 Locking Ring CBL, 10 pce 3SE690231 20090092 Front Wheel LowBase 3SE690241...
• Replacing the Control Unit CBL without using the LSS may cause some data loss as this data is recordable by LSS and a computer. When data is stored in Liko™ database it can be retrieved if needed. • Resetting the Service Interval using the LSS, LDS or Manually, will reset the Accumulated Amp-hours (PAAxT), Accumulated Time (PAKT), Accumulated Operating Time (PADT) and Accumulated number of stops due to overload (PAOLUP).
6.2 Service, Control Unit CBL - Reset Service Interval Parameters CBL RESET SERVICE INTERVAL PARAMETERS After the Periodic Inspection has been performed Service Light and Service Interval Parameters* in the Liko Diagnostic System™ has to be reset. Reset can be done using one of the following Service Tools/Methods: Prod.
Product Description Liko™ Service System is a soft ware developed to enable service technicians to conduct service in an easy way on all lifts equipped with Liko Diagnostic System™ (LDS), found in the Control Unit CBL 20. It also gives the service technician the possibility to program the spare part on the field.
According to ISO 10535:2006 Annex B, Periodic Inspection of medical device Liko™ Mobile Lift should be performed at least once a year. For Liko™ mobile lifts Periodic Inspection Liko Mobile lifts (3EN371001) is available in Agile and on the Partner Web.
Periodic Inspection and Preventive Maintenance is performed by personnel authorized by Hill-Rom and using original Liko™ spare parts. However certain parts have a shorter life cycle and will need to be replaced in order for the mobile lift to meet its expected life time.
Page 24
Service Manual Golvo™ 8000/8008 • 3EN400404 Rev. 6 www.liko.com www.hill-rom.com Mobile Lift...
Need help?
Do you have a question about the Golvo 8000 and is the answer not in the manual?
Questions and answers