Liko LikoScale 200 Accessory User Manual

Liko LikoScale 200 Accessory User Manual

Advertisement

Quick Links

LikoScale™ 200
Accessory
User Guide*
Prod. No. 3156225
LikoScale 200 accessory is a convenient, easy-to-use scale that is intended for weighing patients in Liko mobile or stationary
lifts. Together with Liko's lifts and lifting accessories, LikoScale 200 accessory enables safe and easy weighing.
The weight is shown on the scale's digital display. By selecting unit mode the scale can display either kg or lbs.
The scale should only be used in combination with approved lifts and accessories in accordance with the instructions in this
guide.
LikoScale 200 accessory can be used with the following Liko lifts:
Viking™ mobile lift (S, M, L, XL)
- require Adapter 12 mm, Prod. No. 2016504.
Uno™ mobile lift (all models)
- Uno models with serial numbers from 31825 require
Adapter 12 mm, Prod. No. 2016504.
- Uno models with serial numbers up to 31824 require
Adapter 8 mm, Prod. No. 2016502.
As the lifting height is limited when LikoScale accessory is used in combination with LikoLight™ mobile lift or Viking™ XS
mobile lift, we do not recommend these alternatives.
* This user guide is a complement to the complete documentation issued by the manufacturer of the scale.
The intention with this document is to make it easier for our customers to use LikoScale in combination with Liko's products.
For detailed information regarding the scale we refer you to the manufacturer's Operation Guide (attached).
7EN160154 Rev. 4
ENGLISH
Golvo™ mobile lift (all models)
Likorall™ overhead lift (all models)
Multirall™ overhead lift (all models)
Liko™ MasterLift overhead lift (all models)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LikoScale 200 Accessory and is the answer not in the manual?

Questions and answers

Summary of Contents for Liko LikoScale 200 Accessory

  • Page 1 * This user guide is a complement to the complete documentation issued by the manufacturer of the scale. The intention with this document is to make it easier for our customers to use LikoScale in combination with Liko’s products. For detailed information regarding the scale we refer you to the manufacturer’s Operation Guide (attached).
  • Page 2 Assembly Instructions LikoScale 200 accessory is delivered with two sleeves. The attachment type you have above and below the scale, and the type of sling bar you have determines if both sleeves must be used. Follow the assembly instructions for the appropriate lift, attachment point, and sling bar.
  • Page 3 Alt. 2 Multirall™ overhead lift, Likorall™ overhead lift, MasterLift overhead lift, Golvo™ mobile lift: Quick-release assembly Liko lifts equipped with (Q-Link) quick fastener require the Adapter Kit LikoScale, Prod. No. 3156232. 1. Remove the lifting accessory from the lift 2. Place one sleeve on the scale´s upper attachment point.
  • Page 4 Calibration For calibration, see manufacturer’s Operating and Service Manual or contact Liko. Technical Data Display resolution: 0.1 lb / 0.1 kg Accuracy: 0.1 % +/- Digit of reading Max. load: 200 kg (440 lbs.) Min. load: 10 kg (22 lbs.) Reset: One button reset ( “ZERO”...

Table of Contents