Chase Bliss Audio Brothers AM Manual

Twins of Tone
GAIN 1 & 2
A
Controls the amount of drive and
saturation (will also influence the
overall volume).
VOLUME 1 & 2
B
Controls the output loudness.
TONE 1 & 2
C
Controls the voicing, allowing you to
brighten or darken the sound.
MODE SELECTION
D
Selects the circuit, choosing between
BOOST, OVERDRIVE, or DISTORTION.
Made in collaboration with Analog Man, Brothers AM is a triple stack of
saturation based on the King of Tone transparent overdrive.
Brothers AM is three circuits in series:
B
A
C
H
D
G
Time to get warmed up.
Two identical, multi-mode gain channels
A unique, two-voice treble booster
TREBLE BOOSTER
E
A
Engages a treble booster that pushes the
upper mid and treble frequencies. The treble
booster is linked to and engaged by Channel 1,
and comes at the very front of the circuit.
B
C
PRESETS
F
The left and right positions each store a
H
preset, while the middle position is live
(current settings). There is a second
D
bank accessible via dip switch as well.
E
BYPASS 1 & 2
G
Tap to turn each of the channels on / off.
PRESENCE
H
F
Lets you boost the high frequencies for a
more airy and brilliant sound. To change
the PRESENCE setting, hold down the
BYPASS footswitch and adjust the TONE
G
knob for the channel you want to control.
BOOST CHANNEL CHANNEL
(Hidden option)