Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ATIGO Manuals
  4. Intercom System
  5. A3101
  6. Installation manual

ATIGO A3101 Installation Manual

2-wire video system
Hide thumbs Also See for A3101:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
2-Wire Video
System
Installation Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the A3101 and is the answer not in the manual?

Questions and answers

Related Manuals for ATIGO A3101

Summary of Contents for ATIGO A3101

  • Page 1 2-Wire Video System Installation Manual...
  • Page 2 Introduction Maximum of 4 monitors can be addressed to a single call button. The Atigo door entry system is a 2-Wire system that can be expanded up to 4 Maximum of 4 monitors can be connected in entrance panels and up to 32 non-Wi-Fi daisy chain configuration internal monitors per system.
  • Page 3 DIP switch settings for A3101 Video camera module A3101 The video module is configured by 6 DIP switches. The DIP switches can be modified either before or after installation. Restarting the camera module is necessary whenever the DIP switches have been modified.
  • Page 4 Video module functions and Sound theme settings. programming In Standby, activate programming mode by setting DIP switch 6 to ON position. Press and hold “Touch Key A” for 3 seconds. The hourglass indicator will turn on and current theme will play. pressing “Touch key A”...
  • Page 5 Electric lock mode settings Electric lock with additional power supply. In Standby, activate programming mode by setting DIP switch 6 to ON position. Fail Safe Contact rating is limited to 24V DC and MAXIMUM CURRENT of 1000mA. Press “Touch key A”, the Door Open The jumper JP-LK must be taken off Indicator will turn on with a long Beep before connecting.
  • Page 6 Triggering a Gate automation: Electric lock powered by internal 12V DC output. When triggering a gate, must use A2601 auxiliary relay. NOTE: Do not connect Gate contacts to Internal output is limited to 12V DC and Video module as this will cause permanent MAXIMUM CURRENT of 200 mA.
  • Page 7 Single module connections Connecting multiple modules (Max. 4) Terminals 1. INPUT Connect to CN/KMB port video module 2. OUTPUT Connect to next call module. 3. J3 Call buttons 1, 3, 5, 7 4. J4 Call buttons 2, 4, 6, 8 P a g e...

This manual is also suitable for:

A2400