Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ATIGO Manuals
  4. Intercom System
  5. A3101
  6. Installation manual

ATIGO A3101 Installation Manual

2 wire system
Hide thumbs Also See for A3101:

Advertisement

Quick Links

Download this manual
2 Wire System
Installation Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the A3101 and is the answer not in the manual?

Questions and answers

Related Manuals for ATIGO A3101

Summary of Contents for ATIGO A3101

  • Page 1 2 Wire System Installation Manual...

  • Page 2: Cable Distances

    Introduction The Atigo door entry system is a simple 2 wire solution that can be expanded up to 4 entrance panels and 32 internal monitors. Programming of the camera module is done via built in DIP switches and touch keys.

  • Page 3: Specification

    Video camera module A3101 A3101 Terminals SET (1) DIP switches for system configuration. JP-LK (2) Jumper for setting state of the NO contact CN/KMB (3) Call button module A2400 connection port CN/T-COIL (4) Not in use BUS (5) L1, L2 bus line connecting to terminal...
  • Page 4 DIP switch settings for A3101 Video module functions and programming The system can be expanded up to 4 entrance panels and 32 internal monitors The video module is configured by 6 DIP switches. The DIP switches can be modified either before or after installation.
  • Page 5 Sound setting Electric lock mode setting When the Camera Module is in standby. When the Camera Module is in standby. 1. Press and hold Key A for 3 seconds to 1. Press Key A, the Unlock Indicator will turn enter the Sound Option Mode, the Status on with the warning sound of a long Beep indicator will turn on and the current followed by a short Beep.
  • Page 6 Electric lock (internal power) Electric lock (external power) Electric lock controlled by door lock output. 1. The external power supply must be used The door lock output is limited to 12Vdc, and accordingly to lock specification. a maximum current of 250mA. 2.
  • Page 7 Call button module A2400 Single module connections Terminals 1. INPUT Connect to CN/KMB port video module Connecting multiple modules (Max. 4) 2. OUTPUT Connect to next call module. 3. J3 Call buttons 1, 3, 5, 7 4. J4 Call buttons 2, 4, 6, 8...
  • Page 8 System layout - Distributor mode...
  • Page 10 System layout - Riser mode...

This manual is also suitable for:

A2400