ZKTeco Biosense Series User Manual
  1. Manuals
  2. Brands
  3. ZKTeco Manuals
  4. Security Camera
  5. BioSense Series
  6. User manual
ZKTeco Biosense Series User Manual

ZKTeco Biosense Series User Manual

Hide thumbs Also See for Biosense Series:
Table of Contents

Advertisement

Quick Links

Download this manual
ProFace X [TD]
User Manual
Biosense Series Network Camera
Date: February 2023
Doc Version: 2.5
English
Thank you for choosing our product. Please read the instructions carefully
before operation. Follow these instructions to ensure that the product is
functioning properly. The images shown in this manual are for illustrative
purposes only.
P a g e
| 1
For further details, please visit our Company's website
www.zkteco.com.
Copyright©2020ZKTECO CO., LTD. All rights reserved.
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Biosense Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ZKTeco Biosense Series

Summary of Contents for ZKTeco Biosense Series

  • Page 1 ProFace X [TD] User Manual User Manual Biosense Series Network Camera Date: February 2023 Doc Version: 2.5 English Thank you for choosing our product. Please read the instructions carefully before operation. Follow these instructions to ensure that the product is functioning properly.
  • Page 2 This manual contains information on the operation and primarytenance of the ZKTeco Device. The copyright in all the documents, drawings, etc. in relation to the ZKTeco supplied Device vests in and is the property of ZKTeco. The contents hereof should not be used or shared by the receiver with any third party without express written permission of ZKTeco.
  • Page 3 ZKTeco shall in no way be responsible (i) in case the machine/unit/Device malfunctions due to any non- compliance of the instructions contained in this manual (ii) in case of operation of the machine/unit/Device beyond the rate limits (iii) in case of operation of the machine and Device in conditions different from the prescribed conditions of the manual.
  • Page 4 User Manual About the Company ZKTeco is one of the world’s largest manufacturers of RFID and Biometric (Fingerprint, Facial, and Finger- vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.

  • Page 5: Table Of Contents

    5.11 V ............................29 IDEO AMPERING 5.12 P ............................... 30 RIVACY 5.13 T ............................31 ARGET OUNTING 5.14 O ............................32 BJECT 5.15 A ) ..................... 33 ETECTION NTRUSION ETECTION P a g e Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 6 ETTINGS 5.36 D ..............................50 EVELOPER 5.37 V ..............................51 OICE LERT 6. LOG SEARCH ............................52 7 ALARM ..............................53 8 EXIT ................................. 53 9 FAQ ................................54 P a g e Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 7: Quick Installation Guide(Only Sd Card Model)

    Micro-SD card slot cover at the bottom of camera (for the Conch model, you need to rotate the camera base to expose the Micro-SD card slot). Bullet Type: Turret Type: PTZ Type： Step 2, unscrew the screw, open the cover, can see the internal Micro-SD slot. P a g e Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 8 Step 3, install the Micro-SD card in the correct direction and insert it into the slot. Bullet Type: Turret Type: Step 4, close the cover and tighten the screws. Step 5, power on the camera by PoE or 12V DC. P a g e Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 9: Login Interface

    “Login”, then the system will prompt a message asking whether or not to change the password, as shown in the following figure: P a g e Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 10 , then the following window will pop up. The default user name is “admin”. Click on “Next” to restore the password to factory settings according to the prompt. P a g e | 10 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 11: Live Videos

    Show Smart Detection Rule: Show the rules of smart detection  Show Smart Detection Result: Show the result of smart detection  Save Face Capture Pictrue: Save face capture instantly P a g e | 11 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 12: Full-Screen Preview

    (and exit) the full screen display on the preview interface 2.2 Electronic Zoom-in You may zoom in the preview image by scrolling the mouse wheel, as shown in the following figure: P a g e | 12 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 13: Ptz Control

    Call a Pre-set Point: Call a pre-set point by selecting a pre-set number to be called from the pre-set point drop-down list, and then press the “Call” button. P a g e | 13 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 14: Cruise

    Drag the horizontal bar to adjust the speed of the PTZ rotation. Click the exit button to save and exit the setting page. P a g e | 14 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 15: Playback

    Start: Start the playback. Stop: Stop the playback. Slow: Slow down the playback speed (1/2, 1/4, 1/8, 1/16 times). P a g e | 15 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 16 Voice: Adjust the volume of playback audio. Double-click on the slider to play the video, or you may click the “Start” button to start playing the videos back. P a g e | 16 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 17: File Management

    For more details, please go to Setup → Local Settings. 4.2 Preview Capture To review captured images from video preview; you may search for and double click to obtain images you need. P a g e | 17 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 18: Playback Capture

     Note: You have to insert a TF card first to access the full function display interface; otherwise, the system will only show you the simplified version. P a g e | 18 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 19: Device Information

    IPC with P2P function can be remotely connected to the mobile APP by scanning the QR Code on this page. 5.3 PTZ Settings Below is the PTZ Settings interface of the IP camera: P a g e | 19 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 20: Time Settings

    Device Time: Set and display the current time of the camera.  Time Zone: Different time zones are available.  Enable NTP: Click to enable or disable NTP. P a g e | 20 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 21: Audio Settings

    After completing all parameters settings, click on “Save”, then the settings will take effect immediately. 5.6 Display Settings Below is the Display Settings interface of the IP camera: P a g e | 21 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 22: Streams

    After completing all parameters settings, click on “Save”, then the settings will take effect immediately. 5.7 Streams Below is the Streams setting interface of the IP camera: P a g e | 22 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 23: Roi Settings

    After completing all parameters settings, click on “Save”, then the settings will take effect immediately. 5.8 ROI Settings Below is the ROI Settings interface of the IP camera: P a g e | 23 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 24: Image Parameters

    After completing all parameters settings, click on “Save”, then the settings will take effect immediately. 5.9 Image Parameters Below is the Image Parameters interface of the IP camera: P a g e | 24 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 25 White Light: When turned on, the white light will light up when the trigger conditions are met.  Panel mode: Used to control the infrared lamp on/off/brightness adjustment. After selecting auto, you P a g e | 25 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 26 Brightness: The brightness of the LED board can be set when the LED board control is under “Manual” mode. The value ranges from 1 to 100.  Target Brightness: Adjust the target brightness  AE algorithms: Priority selection of adjusting the brightness P a g e | 26 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 27: Motion Detection

    IPC and alarm device will set off the alarm.  PTZ: Enable or disable PTZ function.  Preset: When motion detection triggers an alarm, the alarm will link with the preset point. P a g e | 27 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 28: Smart Motion

    Alarm Output: There should be an active alarm device inserted into the IPC alarm output port. Once an alarm event is triggered, the IPC and alarm device will set off the alarm. P a g e | 28 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 29: Video Tampering

    Email: Click on “Email”. Once an alarm is triggered, an email will be automatically sent to the appointed mailbox.  Snap: Click on “Snap”. Once an alarm is triggered, a signal will instantly be sent to the camera to take a P a g e | 29 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 30: Privacy Mask

     Clear: Click on “Clear” to delete the current controlled area. After completing all parameters settings, click on “Save”, then the settings will take effect immediately. P a g e | 30 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 31: Target Counting

    Threshold: Set the upper count limit. When the value exceeds the set value, the system will automatically trigger the alarm.  Total Count: Enable or disable the Total Counter function. P a g e | 31 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 32: Object Left / Lost

    After completing all parameters settings, click on “Save”, then the settings will take effect immediately. 5.14 Object Left / Lost Below is the Object Left/Lost setting interface of the IP camera:  Enable: Enable or disable the object detection function. P a g e | 32 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 33: Area Detection (Intrusion Detection)

    After completing all parameters settings, click on “Save”, then the settings will take effect immediately. 5.15 Area Detection (Intrusion Detection) Below is the Area Detection setting interface of the IP camera: P a g e | 33 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 34  Detect Time: When the staying time of the set target in the monitored area exceeds the set duration, the system will trigger the alarm. P a g e | 34 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 35: Line Crossing (Tripwire)

    Area Setting: Click on “Drawing”, then left-click and drag the mouse to set guard lines on the area settings preview interface. Click on “Stopping” to complete the setting. When a target passes through the guard line, the system will trigger the alarm. P a g e | 35 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 36: Video Plan

    After completing all parameters settings, click on “Save”, then the settings will take effect immediately. 5.17 Video Plan Only displayed on TF Card supported camera. Below is the Video Plan setting interface of the IP camera: P a g e | 36 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 37: Network Settings

    After completing all parameters settings, click on “Save”, then the settings will take effect immediately. 5.18 Network Settings Below is the Network Settings interface of the IP camera: P a g e | 37 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 38 Confirm Pwd: Confirm password: Enter the password repeatedly  PPPOE IP: IP setting of PPPOE  After completing all parameters settings, click on “Save”, then the settings will take effect immediately. P a g e | 38 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 39: Http/Https

    Below is the Management Platform interface of the IP camera: Users may activate or deactivate a protocol and modify the protocol information here. 5.21 Multicast Configuration Below is the Multicast Config interface of the IP camera: P a g e | 39 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 40: Ddns Settings

    DDNS is implemented through a dynamic domain resolution server. It requires a fixed IP address on of the device running on the server. The DDNS setting interface of the IP camera is as shown below: P a g e | 40 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 41: Upnp Settings

    After completing the parameters settings, click on “Save”, then the settings will take effect immediately. 5.23 UPnP Settings Below is the UPnP Settings interface of the IP camera: P a g e | 41 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 42: Email Settings

    After completing all parameters settings, click on “Save”, then the settings will take effect immediately. 5.25 FTP Settings Below is the FTP Settings interface of the IP camera: P a g e | 42 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 43: Snmp Settings

    Manager IP: Messages will be sent to this manager IP address.  Send Count: The maximum number of messages to be delivered when an alarm is triggered. The value P a g e | 43 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 44: Alarm Input

    Arming Schedule: Arming schedule can be set from Monday to Sunday. You may set up to 8 schedules for a day.  Email: Click on “Email”. Once an alarm is triggered, an email will be automatically sent to the appointed mailbox. P a g e | 44 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 45: Alarm Output

    After completing all parameters settings, click on “Save”, then the settings will take effect immediately. 5.29 Exception Below is the Exception interface of the IP camera: P a g e | 45 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 46: User Management

    Rights Permission: Permission assignment for default guest users and new users.  Add User: Add a new user. Log in with admin account, add a new user and assign permission, as shown in the following figure: P a g e | 46 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 47: System Update

    Below is the System Update setting interface of the IP camera: File: Click on “Browse” to find and select an upgrade kit, then click “Update”.  Do not disconnect the power supply during upgrade. P a g e | 47 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 48: Auto Reboot

    (MB), status of the current TF card, and format the TF card. Note: Please disconnect the power supply before you insert or remove the TF card. 5.34 Restore Below is the Restore interface of the IP camera: P a g e | 48 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 49: Local Settings

    Import Config: Import selected configuration to the system.  Restore: Restore the device to factory settings.  Reboot: Reboot the device. 5.35 Local Settings Below is the Local Settings interface of the IP camera: P a g e | 49 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 50: Developer

    Live View Mode: Realtime/ Fluency. The value is adjustable. After completing all parameters settings, click on “Save”, then the settings will take effect immediately. 5.36 Developer Below is the Developer interface of the IP camera:5.37 P a g e | 50 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 51: Voice Alert

    Biosense Series Network Camera User Manual 5.37 Voice Alert On this page, you can set the type and volume of sound emitted by the device: P a g e | 51 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 52: Log Search

    6. Log Search Click Search on the Log interface, check device log according to the video type and date time, as shown in the below figure: P a g e | 52 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 53: Alarm

    Below is the Alarm interface of the IP camera. Information about alarms will be shown as follows. 8 Exit Click on “Logout” to log out, as shown in the following figure: P a g e | 53 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 54: Faq

    “Delete”. After that, select “Temporary Internet files” and confirm by choosing “Delete”. Then back to the login page. Question 3: The playback of video is not smooth. Possible reason 1: The IP Camera frame rate is too low. P a g e | 54 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 55 Solution: Turn off the firewall. Question 7: Image is not clear enough. Solution: Try adjusting the parameters for images to reasonable values. For details, please refer to Chapter 5.9 Image Parameters. P a g e | 55 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 56 ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com Copyright © 2023 ZKTECO CO., LTD. All Rights Reserved. P a g e | 56 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

This manual is also suitable for:

Ds-852e31b-s3-mi-s-hlDs-854f33t-s3-mi-s-hlPs-852tc20c-adDs-854f32t-s3-mi-s-hlDs-854f31t-s3-mi-s-hlDs-854f33b-s3-mi-s-hl ... Show all

Table of Contents