STEELGREEN SG36 Instruction Manual
20 gallon tank attachment
Hide thumbs
Also See for SG36:
- Instruction manual (28 pages) ,
- Operator's manual (16 pages) ,
- Installation manual (8 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for STEELGREEN SG36
Summary of Contents for STEELGREEN SG36
- Page 1 INSTRUCTION MANUAL 20 GALLON TANK ATTACHMENT Models: SG36, SG42...
- Page 2 20 GALLON INSTALL INSTRUCTIONS STEP 1: • Disconnect the battery, ground first and then power wire. • Remove the battery from the battery box. GROUND POWER STEP 2: Disconnect the hoses from the hopper. NOTE: Hold the hoses up to prevent oil spillage...
- Page 3 20 GALLON INSTALL INSTRUCTIONS STEP 3: QUICK CONNECT INSTALL NOTE: Be sure the hopper is drained before starting the following steps. • Remove the grate. • Disconnect the hopper motor hoses from the bulk- head fittings. • Remove the bulkhead fittings from the hopper.
- Page 4 20 GALLON INSTALL INSTRUCTIONS • Attach the quick couplers provided with the kit to the hopper. NOTE: Be sure the FEMALE quick connect is on the LEFT SIDE (SHOWN BLUE) and the MALE quick connect is on the RIGHT SIDE (SHOWN RED). •...
- Page 5 20 GALLON INSTALL INSTRUCTIONS • Connect the FEMALE end provided with the kit, to the end of the RIGHT SIDE hose. • Connect the MALE end provided with the kit, to the end of the LEFT SIDE hose. LEFT RIGHT •...
- Page 6 20 GALLON INSTALL INSTRUCTIONS STEP 4: Disconnect the cables from the dash. DIFFUSER RATE GATE DEFLECTOR NOTE: Be sure the hopper is empty before proceeding. STEP 5: Remove the six bolts that hold the hopper as- sembly to the frame and lift the hopper assembly from the frame.
- Page 7 20 GALLON INSTALL INSTRUCTIONS STEP 6: • Set the 20 gallon tank assembly on the frame. • Attach it to the frame with the six bolts.
- Page 8 20 GALLON INSTALL INSTRUCTIONS STEP 7: Attach the valve assembly to the corner of the dash panel. VALVE ASSEMBLY VALVE ASSEMBLY W/FOAM MARKER SUCTION RETURN...
- Page 9 20 GALLON INSTALL INSTRUCTIONS NOTE: • Before beginning step 8, BE SURE there is no pres- sure on the lines and fluid is drained. • Parts not shown for clarity. STEP 8: • Remove the knee pad to access the return & suction lines.
- Page 10 20 GALLON INSTALL INSTRUCTIONS STEP 9: SUCTION • Cut and install 1” suction hose, connecting one end to the suction fitting on the top valve and the other end to the “tee” fitting in the suction line. • Cut and install 3/4” return hose, connecting one end to the return fitting on the bottom valve and the other end to the “tee”...
- Page 11 20 GALLON INSTALL INSTRUCTIONS STEP 10: Connect the “quick disconnect” hos- es from the tank to the valves. • Top valve is SUCTION. • Bottom valve is RETURN. VALVE ASSEMBLY VALVE ASSEMBLY W/FOAM MARKER SUCTION RETURN...
- Page 12 20 GALLON INSTALL INSTRUCTIONS STEP 11: • Set the battery in the battery box. • Reattach the battery cables, power cable and wires first followed by the ground wire. • Attach the battery box cover and bungie strap. GROUND POWER...
- Page 13 MADE IN THE USA Steel Green Mfg. 824 S State Road 39 MANUAL MANUAL DESCRIPTION Lebanon, IN 46052 PART NO. REV. PART NO. (765)-481-2890 www.steelgreenmfg.com SGM-005 20 GALLON TANK ATTACHMENT P10037...
Need help?
Do you have a question about the SG36 and is the answer not in the manual?
Questions and answers