STEELGREEN SG36 Instruction Manual
20 gallon supplemental tank
Hide thumbs
Also See for SG36:
- Instruction manual (28 pages) ,
- Operator's manual (16 pages) ,
- Installation manual (8 pages)
Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for STEELGREEN SG36
Summary of Contents for STEELGREEN SG36
- Page 1 INSTRUCTION MANUAL 20 GALLON SUPPLEMENTAL TANK Models: SG36, SG42...
- Page 2 20 GALLON INSTALL INSTRUCTIONS STEP ONE: • Disconnect the battery, ground first and then power wire. • Remove the battery from the battery box. GROUND POWER STEP TWO: Disconnect the hoses from the hopper and connect them to the circulation fitting. NOTE: Hold the hoses up to prevent oil spillage...
- Page 3 20 GALLON INSTALL INSTRUCTIONS STEP THREE: Disconnect the cables from the dash. DIFFUSER RATE GATE DEFLECTOR NOTE: Be sure the hopper is empty before proceed- ing. STEP FOUR: Remove the six bolts that hold the hopper assembly to the frame and lift the hopper assembly from the frame.
- Page 4 20 GALLON INSTALL INSTRUCTIONS STEP FIVE: • Set the 20 gallon tank assembly on the frame. • Attach it to the frame with the six bolts.
- Page 5 20 GALLON INSTALL INSTRUCTIONS STEP SIX: Attach the valve assembly to the corner of the dash panel. VALVE ASSEMBLY VALVE ASSEMBLY W/FOAM MARKER...
- Page 6 20 GALLON INSTALL INSTRUCTIONS NOTE: • Before beginning step seven, BE SURE there is no pressure on the lines and fluid is drained. • Parts not shown for clarity. STEP SEVEN: • Remove the knee pad to access the return & suction lines.
- Page 7 20 GALLON INSTALL INSTRUCTIONS STEP EIGHT: SUCTION • Cut and install 3/4” suction hose, connecting one end to the suction fitting on the top valve and the other end to the “tee” fitting in the suction line. • Cut and install 3/4” return hose, connecting one end to the return fitting on the bottom valve and the other end to the “tee”...
- Page 8 20 GALLON INSTALL INSTRUCTIONS STEP NINE: Connect the “quick disconnect” hoses from the tank to the valves. • Top valve is SUCTION. • Bottom valve is RETURN. VALVE ASSEMBLY VALVE ASSEMBLY W/FOAM MARKER SUCTION RETURN...
- Page 9 20 GALLON INSTALL INSTRUCTIONS STEP TEN: • Set the battery in the battery box. • Reattach the battery cables, power cable and wires first followed by the ground wire. • Attach the battery box cover and bungie strap. GROUND POWER...
- Page 10 MADE IN THE USA Steel Green Mfg. 824 S State Road 39 MANUAL MANUAL DESCRIPTION Lebanon, IN 46052 PART NO. REV. PART NO. (765)-481-2890 www.steelgreenmfg.com SGM-005 20 GALLON TANK ATTACHMENT P10037...
Need help?
Do you have a question about the SG36 and is the answer not in the manual?
Questions and answers