Adjusting The Dimmer Of Button Lighting At Night; Switching The Display Color; Adjusting The Touch Panel; Initializing The Touch Panel Corrected Values - Alpine INE-S920HD Owner's Manual

Adjusting the Dimmer of Button Lighting at
Night
You can adjust the brightness of the button lighting at night with the
dimmer.
Setting item: Key Illumination Level
Setting level: -2 to +2 (Initial setting: 0)

Switching the Display Color

You can choose from 5 different display colors.
Setting item: Screen Colour
Setting contents: Blue (Initial setting) / Red / Green / Amber /
Black

Adjusting the Touch Panel

Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting item: Screen Alignment
1
Touch [Screen Alignment] in the Screen/LED
Customize screen.
The adjustment screen appears.
2
Accurately touch the
upper left corner of the screen.
3
Accurately touch the
right corner of the screen.
This completes adjustment, and returns to the previous
screen.
• If you touch [ Cancel ] on the adjustment screen, no adjustment is
done and returns to the previous screen.
Initializing the Touch Panel Corrected
Values
Initialize the corrected values adjusted by Adjusting the Touch Panel.
1
Touch [Screen Alignment Reset] in the Screen/
LED Customize screen.
2
After the confirmation message appears, touch
[OK].
The corrected values are initialized.
44
-EN
mark provided in the
mark provided in the lower

Visual Setting

[Visual] is selected on the General setup menu in step 3. Refer to
"General Setup Operation" (page 42).
1
Touch the desired item.
• "Video" can be selected while a video is playing.
2
Touch the desired item.
Settable items differ depending on the application.
[Video] (Video media):
1
Display Mode* / Live Contrast / Visual EQ / Bright / Colour / Tint
/ Contrast / Sharp
2
[Direct Camera]* :
Live Contrast / Bright / Colour / Contrast
2
[AUX Camera]* :
Live Contrast / Bright / Colour / Contrast
[Navigation]:
Bright / Contrast
1
* When media is set to AUX, the settings cannot be changed in the
situations below.
• When "AUX In" is set to "DVB-T" is "On."
2
* The camera names set under the "Direct Camera/AUX Camera"
settings are displayed. The camera names are not displayed when
"Off" is set (pages 61, 62).
3
Touch [ ] or [ ] to change its setting.
4
Touch [ ] to return to the previous screen.
• Immediately after changing the settings of Display Setup (While the
system is writing data automatically) do not turn the ignition key to
OFF. Otherwise, the settings may not be changed.