Advertisement
Quick Links
1
2
4
Brackets must be configured for Passenger or Driver-Side as shown below:
1
5
3
6
7
Driver-Side Orientation
APPLICATION
Ford Super Duty
F-250/350
(Fits all Beds /Cabs)
8
9
10
15
11
16
Passanger-Side Orientation
/3
AMP PART# 7543-0A
2017
12
Torque wrench
13
14
T25 Torx
17
13mm 15mm
3/8" Drill Bit
21mm
22mm
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for AMP Research BedStep 2 75413-01A
Summary of Contents for AMP Research BedStep 2 75413-01A
- Page 1 AMP PART# 7543-0A APPLICATION Ford Super Duty 2017 F-250/350 (Fits all Beds /Cabs) Torque wrench 3/8” Drill Bit T25 Torx 13mm 15mm 21mm 22mm Brackets must be configured for Passenger or Driver-Side as shown below: Driver-Side Orientation Passanger-Side Orientation...
- Page 2 Assemble brackets as shown in next three steps. Note: Driver side shown. Rotate frame spacer 80° for passenger side. (See image in step 1 for passenger orientation). Torque bolts Torque bolts Do not to 20 ft-lbs. to 20 Ft Lbs. tighten bolts.
- Page 3 Install forward support bracket (#5) using supplied Torque both the Flange nut (#11) and bolt (#10) to M8 hardware (#8) bolts and (#9) nuts. Torque bolts 30 Ft Lbs. to 16Ft-Lbs. 13mm 21& 22mm Attach rearward support bracket (#6) using supplied Remove bracket and pre drill hole using a 1/8”...
Need help?
Do you have a question about the BedStep 2 75413-01A and is the answer not in the manual?
Questions and answers