Page 2
Install the SD Cloud Connector Edge 510—DHCP Perform the following steps to install the Symantec SD Cloud Connector (SDCC) Edge 510 and obtain an IP address through DHCP. Step 1—Connect the Power Step 2—Connect to the Internet Connect the power adapter to the AC power outlet; connect the oth- Connect the Edge to an available Internet connection;...
Page 3
7. Click Save Changes to apply the settings. 8. When prompted, enter the default username and password: admin/admin Note: After following these instructions, if you are still unable to activate the Symantec SD Cloud Connector Edge 510, first contact your reseller. Symantec Support is available here:...
Need help?
Do you have a question about the Edge 510 and is the answer not in the manual?
Questions and answers