HotSpring VIGOR COLD PLUNGE Manual

VIGOR
Congratulations on your decision to enjoy the finest cold plunge
available.
Welcome to the growing family of Hot Spring cold plunge owners.
Pre-Delivery Instructions
Please take the time to read this booklet carefully, as it will provide you with the information you will need to ensure
the safe, secure, and timely installation of your new cold plunge. The following sections are guidelines on how to
prepare for delivery and set-up of your new cold plunge. Specifically covered are site selection, delivery access,
ground preparation, and electrical requirements.
Remember to carefully read the Owner's Manual that accompanies your cold plunge, and to complete the warranty
registration within 10 days of delivery. These items, along with other valuable information, will be found in the
Owner's Package which has been placed in the equipment compartment of your cold plunge, where you will also
find its serial number.
Watkins Wellness™ reserves the right to change features, specifications and design without notification and without
incurring any obligation.
DATE PURCHASED: _________________________________________________________________
DATE INSTALLED: ___________________________________________________________________
DEALER: ___________________________________________________________________________
ADDRESS: __________________________________________________________________________
TELEPHONE: _______________________________________________________________________
In most cities and counties, permits will be required for the installation of electrical circuits or the construction of
exterior surfaces (decks and gazebos). In addition, some communities have adopted residential barrier codes which
may require fencing and/or self-closing gates on the property to prevent unsupervised access to a pool (or cold
plunge) by children under 5 years of age. Your Hot Spring cold plunge is equipped with a locking cover that meets
the ASTM F1346 Standard for Safety Covers and as a result, is usually exempt from most barrier requirements. As a
general practice, your local Building Department will inform you of any applicable barrier requirements at the time a
permit is obtained for the installation of an electrical circuit. Your Hot Spring dealer can provide information on which
permits may be required.
Vigor Cold Plunge Pre-Delivery Instructions
COLD PLUNGE
™
Register your warranty
using the QR code below: