Advertisement
Quick Links
for MARELUX underwater photo housings: MX-R5, MX-R5C, MX-R6II, MX-R7
Specifications
▪
Compatible underwater housings:
▪
Compatible photo cameras
▪
Compatible TTL strobes:
▪
TTL outputs onboard:
▪
HSS (High Speed Synchronization) support
▪
Flash settings control by camera menu
▪
Flash settings storage in TTL Converter nonvolatile onboard memory, even after power is turned off
▪
Rear / Front Curtain synchronization support:
▪
Continuous shooting mode (CL / CH) support:
▪
Switching "TTL / M" underwater:
▪
(+/-) "Flash Exposure compensation" support:
▪
Switching power "ON/OFF":
▪
Battery type:
▪
Current consumption (in standby mode)
▪
Battery capacity (+20°C):
▪
Fiber-optical cable type:
▪
Compatible Electric Bulkheads (optional accessories):
▪
Electric Sync Cord support (Sea&Sea, Ikelite):
▪
Dual Electric Sync Cord support (Sea&Sea, Ikelite):
Safety Warning for Batteries usage
➢
Use only batteries of the type specified in the Specification.
➢
Batteries must be new and undamaged. Carefully check batteries before usage.
11080-HSS Optoelectronic TTL Converter (with plastic frame)
for CANON cameras
(Firmware: June-2024)
USER'S MANUAL
Inon Z-330, Z-240, D-200, S-220
Sea&Sea YS-250, YS-D1, YS-D3 Mark II, YSD3-DUO
Ikelite DS-232, DS-230, DS-162, DS-161, DS-160, DS-125
Retra Pro MAX
Marelux APOLLO-III V2.0, APOLLO-S
Subtronic Pro 270, Pro 160
613 cores only (Nauticam 26216 / 26217, HowShot 613L, Sea&Sea 50133 / 50128 / 50135)
Marelux MX-R5, MX-R5C, MX-R6II, MX-R7
(including HSS functionality)
(including HSS functionality)
manual type HSS with Retra and Apollo strobes, - up to 1/8000s
65 000 flashes, 1 year in standby mode
UWTechnics electric M14 bulkheads (Nikonos, S-6, Ikelite)
Canon
2 optical + 1 electrical
automatic by camera command
CR2032 (2pcs.)
0.01 mkA
yes
yes
yes
yes
yes
yes
yes
yes
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for UWT 11080-HSS
Summary of Contents for UWT 11080-HSS
- Page 1 11080-HSS Optoelectronic TTL Converter (with plastic frame) for MARELUX underwater photo housings: MX-R5, MX-R5C, MX-R6II, MX-R7 for CANON cameras (Firmware: June-2024) USER’S MANUAL Specifications ▪ Compatible underwater housings: Marelux MX-R5, MX-R5C, MX-R6II, MX-R7 ▪ Compatible photo cameras Canon ▪ Compatible TTL strobes: Inon Z-330, Z-240, D-200, S-220 Sea&Sea YS-250, YS-D1, YS-D3 Mark II, YSD3-DUO...
- Page 2 ➢ To avoid leakage or explosion, always check appropriate battery terminals position (“plus” terminal up) before installing to the TTL Converter. ➢ Never expose batteries to overheating, short-circuiting, disassembling, high pressure, mechanical deformation. Save batteries from high humidity and water. All these circumstances may cause a chemical leakage, electric shock, explosion or fire, which can be dangerous for health.
- Page 3 Setting your strobe type ▪ Set TTL-Converter onboard rotary switch according to your strobe type: 0 – Manual Mode (TTL protocol is disabled) 1 – Inon Z-240, D-200, Marelux APOLLO-III V2.0, APOLLO-S (including HSS functionality) 2 – Sea&Sea YS-D1, Inon S-220 3 –...
- Page 4 Use other settings recommended by your camera User Manual. ▪ Using camera menu photographer can totally control TTL Converter underwater. ▪ Flash settings are always stored in TTL-Converter nonvolatile onboard memory, even after power is turned off. This is very comfortable feature.
- Page 5 Shooting in TTL flash mode ▪ Set main dial switch on the underwater strobe body to TTL mode. Please refer to concrete strobe User Manual to choose an appropriate mode (Z330, Z-240, Retra Pro MAX set to “S-TTL”, YS-D1 set to “DS-TTL”, YS-250/DS-161/DS160 set to “TTL”).
- Page 6 Use camera “Flash Exposure Compensation” function. Such adjustment is recommended, it is deeper, more accurate, works for both types of connection. Available “Flash Exposure Compensation” range for Canon cameras: -3 Ev…0...+3 Ev. User can adjust it by steps 0.3 Ev or 0.5 Ev (choose the step by camera menu), viewing the value on the camera menu scale.
- Page 7 For information: If camera is in “M” mode by menu, - all Pre-flashes in system are disabled. If user needs to get full dump from underwater strobe, - set “FULL” on the strobe body, set camera menu to “M” mode and flash output level “1/1”...
- Page 8 Warranty ▪ This warranty only applies to products purchased from Underwater Technics authorized distributor / dealer and does not extend beyond the initial retail purchaser. ▪ Product warranted against any manufacturing defects for two years from the date of purchase for consumer use. ▪...
Need help?
Do you have a question about the 11080-HSS and is the answer not in the manual?
Questions and answers