Advertisement
Quick Links
Specifications
▪
Compatible underwater housings:
▪
Compatible photo cameras
▪
Compatible TTL strobes:
▪
TTL outputs onboard:
▪
HSS (High Speed Synchronization) support
▪
Flash settings control by camera menu
▪
Flash settings storage in TTL Converter nonvolatile onboard memory, even after power is turned off
▪
Rear / Front Curtain synchronization support:
▪
Continuous shooting mode (CL / CH) support:
▪
Switching "TTL / M" underwater:
▪
(+/-) "Flash Exposure compensation" support:
▪
Switching power "ON/OFF":
▪
Battery type:
▪
Current consumption (in standby mode)
▪
Battery capacity (+20°C):
▪
Fiber-optical cable type:
▪
Compatible Electric Bulkheads (optional accessories):
▪
Electric Sync Cord support (Sea&Sea):
▪
Dual Electric Sync Cord support (Sea&Sea):
11064-HSS Optoelectronic TTL Converter
for NEXUS underwater photo housings for CANON cameras
(Firmware: June-2024)
USER'S MANUAL
Inon Z-330, Z-240, D-200, S-220
Sea&Sea YS-250, YS-D1, YS-D3 Mark II, YSD3-DUO
Ikelite DS-232, DS-230, DS-162, DS-161, DS-160, DS-125
Retra Pro MAX
Marelux APOLLO-III V2.0, APOLLO-S
Subtronic Pro 270, Pro 160
613 cores only (Nauticam 26216 / 26217, HowShot 613L, Sea&Sea 50133 / 50128 / 50135)
(including HSS functionality)
(including HSS functionality)
manual type HSS with Retra and Apollo strobes, - up to 1/8000s
25 000 flashes, 1 year in standby mode
UWTechnics electric M14 bulkheads (Nikonos, S-6, Ikelite)
Nexus
Canon
2 optical + 2 electrical
automatic by camera command
CR1220 (2pcs.)
0.01 mkA
yes
yes
yes
yes
yes
yes
yes
yes
Advertisement
Related Manuals for UWT 11064-HSS
Summary of Contents for UWT 11064-HSS
- Page 1 11064-HSS Optoelectronic TTL Converter for NEXUS underwater photo housings for CANON cameras (Firmware: June-2024) USER’S MANUAL Specifications ▪ Compatible underwater housings: Nexus ▪ Compatible photo cameras Canon ▪ Compatible TTL strobes: Inon Z-330, Z-240, D-200, S-220 Sea&Sea YS-250, YS-D1, YS-D3 Mark II, YSD3-DUO...
- Page 2 Safety Warning for Batteries usage ➢ Use only batteries of the type specified in the Specification. ➢ Batteries must be new and undamaged. Carefully check batteries before usage. ➢ To avoid leakage or explosion, always check appropriate battery terminals position (“plus” terminal up) before installing to the TTL Converter.
- Page 3 Setting your strobe type ▪ Set TTL-Converter onboard rotary switch according to your strobe type: 0 – Manual Mode (TTL protocol is disabled) 1 – Inon Z-240, D-200, Marelux APOLLO-III V2.0, APOLLO-S (including HSS functionality) 2 – Sea&Sea YS-D1, Inon S-220 3 –...
- Page 4 ▪ Using camera menu photographer can totally control TTL Converter underwater. ▪ Flash settings are always stored in TTL-Converter nonvolatile onboard memory, even after power is turned off. This is very comfortable feature. After shooting on land, all last flash settings for underwater usage will be loaded into the camera automatically from TTL Converter.
- Page 5 Shooting in TTL flash mode ▪ Set main dial switch on the underwater strobe body to TTL mode. Please refer to concrete strobe User Manual to choose an appropriate mode (Z330, Z-240, Retra Pro MAX set to “S-TTL”, YS-D1 set to “DS-TTL”, YS-250/DS-161/DS160 set to “TTL”).
- Page 6 Use camera “Flash Exposure Compensation” function. Such adjustment is recommended, it is deeper, more accurate, works for both types of connection. Available “Flash Exposure Compensation” range for Canon cameras: -3 Ev…0...+3 Ev. User can adjust it by steps 0.3 Ev or 0.5 Ev (choose the step by camera menu), viewing the value on the camera menu scale.
- Page 7 For information: If camera is in “M” mode by menu, - all Pre-flashes in system are disabled. If user needs to get full dump from underwater strobe, - set “FULL” on the strobe body, set camera menu to “M” mode and flash output level “1/1”...
- Page 8 ▪ Product warranted against any manufacturing defects for two years from the date of purchase for consumer use. ▪ Manufacturer accepts no responsibility for any damage and defects in product caused by improper use and/or poor maintenance. ▪ The product is intended for underwater use. Damages or defects caused by use on land will be rated as improper use and are not covered by the warranty.
Need help?
Do you have a question about the 11064-HSS and is the answer not in the manual?
Questions and answers