Advertisement
Quick Links
for NAUTICAM NA-R7 (initial version housing with a flat mounting area)
Specifications
▪
Compatible underwater housing:
▪
Compatible photo cameras
▪
Compatible TTL strobes:
▪
TTL outputs onboard:
▪
HSS (High Speed Synchronization) support
▪
Flash settings control by camera menu
▪
Flash settings storage in TTL Converter nonvolatile onboard memory, even after power is turned off
▪
Rear / Front Curtain synchronization support:
▪
Continuous shooting mode (CL / CH) support:
▪
Switching "TTL / M" underwater:
▪
(+/-) "Flash Exposure compensation" support:
▪
Switching power "ON/OFF":
▪
Battery type:
▪
Current consumption (in standby mode)
▪
Battery capacity (+20°C):
▪
Fiber-optical cable type:
▪
Compatible Electric Bulkheads (optional accessories):
▪
Electric Sync Cord support (Sea&Sea, Ikelite):
▪
Dual Electric Sync Cord support (Sea&Sea, Ikelite):
11053-HSS Optoelectronic TTL Converter
for CANON R7 camera
(Firmware: June-2024)
USER'S MANUAL
Inon Z-330, Z-240, D-200, S-220
Sea&Sea YS-250, YS-D1, YS-D3 Mark II, YSD3-DUO
Ikelite DS-232, DS-230, DS-162, DS-161, DS-160, DS-125
Retra Pro MAX
Marelux APOLLO-III V2.0, APOLLO-S
Subtronic Pro 270, Pro 160
613 cores only (Nauticam 26216 / 26217, HowShot 613L, Sea&Sea 50133 / 50128 / 50135)
Nauticam NA-R7 (initial version housing with a flat mounting area)
(including HSS functionality)
manual type HSS with Retra and Apollo strobes, - up to 1/8000s
65 000 flashes, 1 year in standby mode
UWTechnics electric M14 bulkheads (Nikonos, S-6, Ikelite)
(including HSS functionality)
2 optical + 1 electrical
automatic by camera command
CR2032 (2pcs.)
Canon R7
yes
yes
yes
yes
yes
yes
0.01 mkA
yes
yes
Advertisement
Related Manuals for UWT 11053-HSS
Summary of Contents for UWT 11053-HSS
- Page 1 11053-HSS Optoelectronic TTL Converter for NAUTICAM NA-R7 (initial version housing with a flat mounting area) for CANON R7 camera (Firmware: June-2024) USER’S MANUAL Specifications ▪ Compatible underwater housing: Nauticam NA-R7 (initial version housing with a flat mounting area) ▪ Compatible photo cameras Canon R7 ▪...
- Page 2 ▪ Product #11053-HSS can be installed only in NA-R7 initial version housing which has a flat area around the optical holes for the TTL-Converter installation. It does not fit the second version Nauticam housing NA-R7 with has a stepped area in that place.
- Page 3 IMPORTANT! Please, read the notes given below for some strobes usage: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ▪ YS-D3-DUO strobe programming and notes: • YS-D3-DUO must be programmed before the usage, according to its User Manual, to the following settings: Pre-flash cancel setting must be programmed: “5.6” (mode C), Optical input setting must be programmed: “1”...
- Page 4 ▪ Enter External flash functions setting submenu: Flash firing – “Enable” (switch ON the flash) or “Disable” (switch OFF the flash) E-TTL II meter. – Recommended to set “Average” metering type, as initial setting, “Evaluative” type also can be useful with some camera models. Flash sync.
- Page 5 ▪ Connect TTL-Converter Hot Shoe plug to the camera Hot Shoe socket. Switch ON the camera. TTL-Converter activates automatically (switch ON) when user pushes camera Shutter Release Button for shooting or focusing. Device goes to standby mode (switch OFF) also automatically few seconds later (according the camera command), or after disconnection from camera Hot Shoe socket.
- Page 6 Shooting in Manual flash mode ▪ Underwater photographer can use 3 different ways to shoot in Manual mode: Camera menu Manual mode Underwater strobe Manual mode TTL-Converter hardwire Manual mode Camera menu Manual Mode (controlled M mode) Switch system to Manual mode by camera menu. Set underwater strobe to S-TTL (TTL) mode for availability of flash output adjustment via camera controls.
- Page 7 Setting TTL-Converter rotary switch to “0” position can be done only before submerging, when the housing is open. This is forced Manual mode. This case camera does not recognize any device on it’s HotShoe socket, TTL protocol in system is totally disabled. In this mode TTL-Converter emits single pulse of fixed (maximum) duration at each shutter release.
- Page 8 ▪ In case of warranty claim the corresponding proof-of-purchase (sales receipt / invoice) or warranty certificate issued by an official regional Underwater Technics distributor / dealer must be presented. ▪ Underwater Technics company and its distributors / dealers don’t cover the warranty if the corresponding proof-of- purchase (sales receipt / invoice) or warranty certificate issued by an official regional Underwater Technics distributor / dealer is not produced when presenting a warranty claim.
Need help?
Do you have a question about the 11053-HSS and is the answer not in the manual?
Questions and answers