UWT 16033-HSS User Manual

Specifications
▪
Compatible photo cameras:
▪
Compatible underwater housings:
▪
Compatible strobes:
▪
TTL outputs:
▪
HSS (High Speed Synchronization) support
▪
Flash settings control by camera menu
▪
Rear / Front Curtain synchronization support:
▪
Continuous shooting mode (CL / CH) support:
▪ Switching "TTL / M" underwater:
▪ (+/-) "Flash Exposure compensation" support:
▪ Switching power "ON/OFF":
▪
Battery type:
▪
Current consumption (in standby mode)
▪
Battery capacity (+20°C):
▪
Fiber-optical cable type:
Safety Warning for Batteries usage
➢
Use only batteries of the type specified in the Specification.
➢
Batteries must be new and undamaged. Carefully check batteries before usage.
➢ To avoid leakage or explosion, always check appropriate battery terminals position ("plus" terminal up) before installing to
the TTL Converter.
➢
Never expose batteries to overheating, short-circuiting, disassembling, high pressure, mechanical deformation. Save
batteries from high humidity and water. All these circumstances may cause a chemical leakage, electric shock, explosion or
fire, which can be dangerous for health.
16033-HSS Optoelectronic TTL Converter
for SEAFROGS underwater photo housings
for SONY A6000 - A6600 cameras
(Firmware: June-2024)
USER'S MANUAL
Inon Z-330, Z-240, S-220, D-200,
Sea&Sea YS-250, YS-D1, YS-D3 Mark II, YS-D3 DUO,
Ikelite Ds-232, DS-230, DS-162, DS-161, DS-160, DS-125,
Subtronic Pro-270, Pro-160 (by electric sync cord),
Retra Pro MAX (including HSS functionality),
Marelux APOLLO-III V2.0, APOLLO-S (including HSS functionality)
613 cores only (Nauticam 26216 / 26217, HowShot 613L, Sea&Sea 50133 / 50128 / 50135)
manual type HSS with Retra and Apollo strobes, - up to 1/8000s
25 000 flashes, 6 months in standby mode
Sony A6000-A6600
Seafrogs
2 optical
automatic by camera command
CR1220 (2pcs.)
0.01 mkA
yes
yes
yes
yes
yes