Advertisement
Quick Links
Specifications
▪
Compatible photo cameras:
▪
Compatible underwater housings:
▪
Compatible strobes:
▪
TTL outputs onboard:
▪
HSS (High Speed Synchronization) support
▪
Flash settings control by camera menu
▪
Rear / Front Curtain synchronization support:
▪
Continuous shooting mode (CL / CH) support:
▪
Switching "TTL / M" underwater:
(+/-) "Flash Exposure compensation" support:
▪
▪
Switching power "ON/OFF":
▪
Battery type:
▪
Current consumption (in standby mode)
▪
Battery capacity (+20°C):
▪
Fiber-optical cable type:
▪
Compatible Electric Bulkheads (optional accessories):
▪
Electric Sync Cord support (Sea&Sea, Ikelite):
▪
Dual Electric Sync Cord support (Sea&Sea, Ikelite):
11082-HSS Optoelectronic TTL Converter (with 2 LEDs)
for ISOTTA underwater photo housings
for SONY A1-A9II cameras
(Firmware: June-2024)
USER'S MANUAL
Inon Z-330, Z-240, S-220, D-200,
Sea&Sea YS-250, YS-D1, YS-D3 Mark II, YS-D3 DUO,
Ikelite Ds-232, DS-230, DS-162, DS-161, DS-160, DS-125,
Subtronic Pro-270, Pro-160 (by electric sync cord),
Retra Pro MAX (including HSS functionality),
Marelux APOLLO-III V2.0, APOLLO-S (including HSS functionality)
613 cores only (Nauticam 26216 / 26217, HowShot 613L, Sea&Sea 50133 / 50128 / 50135)
manual type HSS with Retra and Apollo strobes, - up to 1/8000s
65 000 flashes, 1 year in standby mode
UWTechnics #91596 cable adapter + Isotta original bulkhead
Sony A1– A9II
ISOTTA
2 optical + 1 electrical
automatic by camera command
CR2032 (2pcs.)
0.01 mkA
yes
yes
yes
yes
yes
yes
yes
Advertisement
Related Manuals for UWT 11082-HSS
Summary of Contents for UWT 11082-HSS
- Page 1 11082-HSS Optoelectronic TTL Converter (with 2 LEDs) for ISOTTA underwater photo housings for SONY A1-A9II cameras (Firmware: June-2024) USER’S MANUAL Specifications ▪ Compatible photo cameras: Sony A1– A9II ▪ Compatible underwater housings: ISOTTA ▪ Compatible strobes: Inon Z-330, Z-240, S-220, D-200, Sea&Sea YS-250, YS-D1, YS-D3 Mark II, YS-D3 DUO,...
- Page 2 Safety Warning for Batteries usage ➢ Use only batteries of the type specified in the Specification. ➢ Batteries must be new and undamaged. Carefully check batteries before usage. ➢ To avoid leakage or explosion, always check appropriate battery terminals position (“plus” terminal up) before installing to the TTL Converter.
- Page 3 Setting the strobe type ▪ Set TTL-Converter onboard rotary switch according your strobe type: ➢ 0 - Hardwire Manual Mode ➢ 1 - Inon Z-240, Sea&Sea YS-D1 ➢ 2 - Marelux Apollo-III V2.0 (** important note read below) ➢ 3 - Sea&Sea YS-D3 Mark II, Apollo-S (** important note read below) ➢...
- Page 4 ▪ In Flash Mode menu set “Fill-flash”, “Slow” sync, or “Rear curtain” sync, depending on the shooting tasks: ▪ Based on the concrete camera model and strobes quantity (a single strobe, a pair, or more) photographer should set any initial (+/-) Flash Exposure Compensation for balanced flash lighting. Please make a land test of TTL work before submerging.
- Page 5 without Pre-flashes. This is preferable Manual mode for universal usage, easy switchable and controllable during the diving. Based on your camera firmware, if “WL” sign doesn’t show on the Flash Mode Menu, it can also be found on page 11 of Camera Menu 1.
- Page 6 TTL-Converter Hardwire Manual Mode (set by onboard switch to “0” position): Set TTL-Converter onboard rotary switch to “0” position. Set underwater strobe to M mode without pre-flashes by dial switch on the strobe body. Adjust strobe light intensity by the dial switch on the strobe body. Setting TTL-Converter rotary switch to “0”...
- Page 7 Warranty ▪ This warranty only applies to products purchased from Underwater Technics authorized distributor / dealer and does not extend beyond the initial retail purchaser. ▪ Product warranted against any manufacturing defects for two years from the date of purchase for consumer use. ▪...
Need help?
Do you have a question about the 11082-HSS and is the answer not in the manual?
Questions and answers