Advertisement
Quick Links
for Sea&Sea MDX-5D Mark III and MDX-6D underwater housings for CANON cameras
Specifications
▪
Compatible photo cameras:
▪
Compatible underwater housings :
▪
Compatible TTL strobes:
▪
TTL outputs onboard:
▪
HSS (High Speed Synchronization) support
▪
Flash settings control by camera menu
▪
Flash settings storage in TTL Converter nonvolatile onboard memory, even after power is turned off
▪
Rear / Front Curtain synchronization support:
▪
Continuous shooting mode (CL / CH) support:
▪
Switching "TTL / M" underwater:
(+/-) "Flash Exposure compensation" support:
▪
▪
Switching power "ON/OFF":
▪
Battery type:
▪
Current consumption (in standby mode)
▪
Battery capacity (+20°C):
▪
Fiber-optical cable type:
▪
Compatible Electric Bulkheads (optional accessories):
▪
Electric Sync Cord support (Sea&Sea, Ikelite):
▪
Dual Electric Sync Cord support (Sea&Sea, Ikelite):
11046-HSS Optoelectronic TTL Converter
(Firmware: June-2024)
USER'S MANUAL
Inon Z-330, Z-240, D-200, S-220
Sea&Sea YS-250, YS-D1, YS-D3 Mark II, YSD3-DUO
Ikelite DS-232, DS-230, DS-162, DS-161, DS-160, DS-125
Retra Pro MAX
Marelux APOLLO-III V2.0, APOLLO-S
Subtronic Pro 270, Pro 160
613 cores only (Nauticam 26216 / 26217, HowShot 613L, Sea&Sea 50133 / 50128 / 50135)
(including HSS functionality)
(including HSS functionality)
manual type HSS with Retra and Apollo strobes, - up to 1/8000s
65 000 flashes, 1 year in standby mode
UWTechnics electric M14 bulkheads (Nikonos, S-6, Ikelite)
Sea&Sea MDX-5D Mark III / MDX-6D
2 optical + 2 electrical
automatic by camera command
CR2032 (2pcs.)
Canon
yes
yes
yes
yes
yes
yes
0.01 mkA
yes
yes
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for UWT 11046-HSS
Summary of Contents for UWT 11046-HSS
- Page 1 11046-HSS Optoelectronic TTL Converter for Sea&Sea MDX-5D Mark III and MDX-6D underwater housings for CANON cameras (Firmware: June-2024) USER’S MANUAL Specifications ▪ Compatible photo cameras: Canon ▪ Compatible underwater housings : Sea&Sea MDX-5D Mark III / MDX-6D ▪ Compatible TTL strobes: Inon Z-330, Z-240, D-200, S-220 Sea&Sea YS-250, YS-D1, YS-D3 Mark II, YSD3-DUO...
- Page 2 Safety Warning for Batteries usage ➢ Use only batteries of the type specified in the Specification. ➢ Batteries must be new and undamaged. Carefully check batteries before usage. ➢ To avoid leakage or explosion, always check appropriate battery terminals position (“plus” terminal up) before installing to the TTL Converter.
- Page 3 7 – Retra Pro MAX (including HSS functionality) 8 – Subtronic Pro-160 (by electric sync cord) 9 – Sea&Sea YS-D3 DUO (YS-D3 DUO strobe programming and notes are listed below) IMPORTANT! Please, read the notes given below for some strobes usage: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ▪...
- Page 4 ▪ Enter External flash functions setting submenu: Flash firing – “Enable” (switch ON the flash) or “Disable” (switch OFF the flash) E-TTL II meter. – Recommended to set “Average” metering type, as initial setting, “Evaluative” type also can be useful with some camera models. Flash sync.
- Page 5 ▪ Connect TTL-Converter Hot Shoe plug to the camera Hot Shoe socket. Switch ON the camera. TTL-Converter activates automatically (switch ON) when user pushes camera Shutter Release Button for shooting or focusing. Device goes to standby mode (switch OFF) also automatically few seconds later (according the camera command), or after disconnection from camera Hot Shoe socket.
- Page 6 Shooting in Manual flash mode ▪ Underwater photographer can use 3 different ways to shoot in Manual mode: Camera menu Manual mode Underwater strobe Manual mode TTL-Converter hardwire Manual mode Camera menu Manual Mode (controlled M mode) Switch system to Manual mode by camera menu. Set underwater strobe to S-TTL (TTL) mode for availability of flash output adjustment via camera controls.
- Page 7 Set underwater strobe to M mode without pre-flashes. Adjust strobe light intensity by the dial switch on the strobe body. Setting TTL-Converter rotary switch to “0” position can be done only before submerging, when the housing is open. This is forced Manual mode. This case camera does not recognize any device on it’s HotShoe socket, TTL protocol in system is totally disabled.
- Page 8 ▪ Manufacturer accepts no responsibility for any loss of captured images or the inability to capture images even if it is due to the malfunctioning of the product. ▪ In case of warranty claim the corresponding proof-of-purchase (sales receipt / invoice) or warranty certificate issued by an official regional Underwater Technics distributor / dealer must be presented.
Need help?
Do you have a question about the 11046-HSS and is the answer not in the manual?
Questions and answers