Advertisement
Quick Links
11059-HSS-MFU Optoelectronic TTL Converter (with metal U-shape frame)
Specifications
▪
Compatible photo cameras:
▪
Compatible underwater housings:
▪
Compatible strobes:
▪
TTL outputs onboard:
▪
HSS (High Speed Synchronization) support
▪
Flash settings control by camera menu
▪
Rear / Front Curtain synchronization support:
▪
Continuous shooting mode (CL / CH) support:
▪
Switching "TTL / M" underwater:
▪
(+/-) "Flash Exposure compensation" support:
Switching power "ON/OFF":
▪
▪
Battery type:
▪
Current consumption (in standby mode)
▪
Battery capacity (+20°C):
▪
Fiber-optical cable type:
▪
Compatible Electric Bulkheads (optional accessories):
▪
Electric Sync Cord support (Sea&Sea, Ikelite):
▪
Dual Electric Sync Cord support (Sea&Sea, Ikelite):
for MARELUX underwater housings: MX-A7CII
(Firmware: June-2024)
USER'S MANUAL
Inon Z-330, Z-240, S-220, D-200,
Sea&Sea YS-250, YS-D1, YS-D3 Mark II, YS-D3 DUO,
Ikelite DS-232, DS-230, DS-162, DS-161, DS-160, DS-125,
Subtronic Pro-270, Pro-160,
Retra Pro MAX (including HSS functionality)
Marelux APOLLO-III V2.0, APOLLO-S (including HSS functionality)
613 cores only (Nauticam 26216 / 26217, HowShot 613L, Sea&Sea 50133 / 50128 / 50135)
for SONY cameras
manual type HSS with Retra and Apollo strobes, - up to 1/8000s
UWTechnics electric M14 bulkheads (Nikonos, Ikelite)
Marelux MX-A7CII
2 optical + 1 electrical
automatic by camera command
CR2032 (2pcs.)
65 000 flashes, 1 year in standby mode
Sony A7CII
yes
yes
yes
yes
yes
0.01 mkA
yes
yes
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for UWT 11059-HSS-MFU
Summary of Contents for UWT 11059-HSS-MFU
- Page 1 11059-HSS-MFU Optoelectronic TTL Converter (with metal U-shape frame) for MARELUX underwater housings: MX-A7CII for SONY cameras (Firmware: June-2024) USER’S MANUAL Specifications ▪ Compatible photo cameras: Sony A7CII ▪ Compatible underwater housings: Marelux MX-A7CII ▪ Compatible strobes: Inon Z-330, Z-240, S-220, D-200, Sea&Sea YS-250, YS-D1, YS-D3 Mark II, YS-D3 DUO,...
- Page 2 Safety Warning for Batteries usage ➢ Use only batteries of the type specified in the Specification. ➢ Batteries must be new and undamaged. Carefully check batteries before usage. ➢ To avoid leakage or explosion, always check appropriate battery terminals position (“plus” terminal up) before installing to the TTL Converter.
- Page 3 TTL Converter Battery energy saving ▪ TTL Converter battery can work about 1 year, but only if camera activity settings have been set properly by user. ▪ When camera is active, TTL Converter is also active and consumes energy from battery. When camera is not active (Standby mode or switched OFF), the TTL-Converter is also switched OFF automatically.
- Page 4 Pre-flash control magnet must be in “Push” (down) position and locked by rotation. Using optical synchronization, set right dial switch on the strobe body to “0ev” (position “12 o’clock”), but using electrical wire synchronization set right dial switch to “ttl” mark as fixed position (“9 o’clock”). In case of optical synchronization, TTL correction (+/-) is available by the strobe dial switch “+/-Ev”...
- Page 5 Shooting in Manual mode ▪ Underwater photographer can use 3 different methods for shooting in Manual mode: Camera menu Manual mode Underwater strobe Manual mode TTL-Converter hardwire Manual mode Camera menu controlled Manual Mode (set by camera menu assigned command – “WL”) Switch TTL-converter to Manual mode by camera menu (“WL”...
- Page 6 • Special note for YS-D3 DUO strobe usage: TTL Converter’s Flash intensity adjustment by camera controls in this “Controlled Manual mode” is not applicable with YS-D3 DUO via optical input, because of the optical signal processing algorithm inside the strobe. Although the electric input of YS-D3 DUO supports this feature normally. Underwater Strobe Manual Mode (set by underwater strobe dial switch): Set underwater strobe dial switch to M mode without pre-flashes.
- Page 7 ▪ For Continuous (Serial) Shooting with underwater strobes, it is strongly recommended to use Manual mode and set small flash intensities manually. This way it is possible to get serial shots with acceptable lighting accuracy due to reduced recycle times. Storage ▪...
Need help?
Do you have a question about the 11059-HSS-MFU and is the answer not in the manual?
Questions and answers