Energize Lab Eilik E-Manual page 6

- 5 -
① Multiple Devices Communication
Connect Multiple robots through the bottom Magnetic Pogo Pin to test
Multiple-device functions (see Appendix 2 for specific terms).
② Single Device Communication
Connect the computer correctly according to the User Manual, ensuring that
the update tool can recognize the device and start firmware updates
normally (see Appendix 3 for firmware updates).
If you find any problems or malfunctions during the unboxing and testing
process, please carefully review this self-check manual and User Manual
again. If the problem persists, please reach out to our customer support
team at eilik@energizelab.com
Common Problems and Troubleshooting
3.
This section involves four types of tests, as detailed in Appendix 2. For
instructions on firmware updates, please refer to Appendix 3.
3.1. Power Supply and Battery
This section provides troubleshooting methods for power connection and
robot charging issues.
Battery
•
Situation 1
￮
Connected to the power supply, the robot screen displays a charging
icon or a 100% battery icon. It can be turned on normally while
charging, but by unplugging the charging cable, the robot
immediately turns off.
It could be a result of a damaged battery or faulty connections in the
▪
battery circuit.
▪
for further assistance and solutions.