Energize Lab Eilik E-Manual page 21

Try formatting the SD card and re-updating the robot.
￮
Situation 3
•
The screen displays "format ok error code 1", and the firmware update
is complete, but "Error Missing Firmware" is still displayed.
When error code 1 occurs, it signifies a pseudo-write program,
￮
indicating that the firmware update was not completed. Try formatting
the SD card and performing the update again.
• Situation 4
The screen displays "try init SD card error code 1".
It is a card initialization error. Try formatting the SD card and
￮
performing the update again.
• Situation 5
The screen displays "SD card size error... error code 1".
- 20 -