Icon Process Controls Truflo UltraFlo UF500 Series Quick Start Manual page 2

Truflo — UltraFlo
®
Clamp-On Ultrasonic Flow Meter Sensor
Safety Information
■ Confirm chemical compatibility before use
■ DO NOT exceed maximum temperature or pressure specifications
■ ALWAYS wear safety goggles or face-shield during installation and/or service
■ DO NOT alter product construction
Warning | Caution | Danger
Indicates a potential hazard. Failure to follow all warnings may lead to equipment damage, or failure, injury, or death.
Intended Use
The manufacturer is not responsible for improper use, losses of work caused by either direct or indirect damage, and for
?
expenses incurred during installation or use of the flow meter.
The manufacturer is not liable for any injury, damage or harm due to inappropriate or unintended use or modifications of the
?
flow meter. Conversions and/or changes to the flow meter may only be made, if they are expressly performed in accordance
with the operating instructions in this operating manual.
Personnel for Installation, Commissioning, and Operation
All operations described in this instruction manual (i.e. assembly, electrical installation, commissioning and maintenance of
?
the flow meter) must be carried out only by trained personnel or an accredited person. The qualified personnel must have
read and understood the operating instructions in this manual and must follow said instructions accordingly.
The installer has to ensure that the flow meter is correctly connected according to the electrical connection diagrams in this
?
operating manual.
Serious injury or death from electric shock may occur if wiring, installation, disassembly or removal of wires is performed while
?
electrical power is energized.
Warranty and post warranty service must be exclusively carried out by the manufacturer.
?
25-0613 © Icon Process Controls Ltd.
UF-500S
®
WARNING
2