Download Print this page

UWT 16034-HSS User Manual

Optoelectronic ttl converter for seafrogs underwater photo housings (housing version with an electric bulkhead on the top) for sony a7, a7ii, a7iii, a7iv cameras

Advertisement

Quick Links

Specifications
Compatible photo cameras:
Compatible underwater housings:
Compatible strobes:
TTL outputs onboard:
Optical Bulkhead (Seafrogs style mount):
HSS (High Speed Synchronization) support
Flash settings control by camera menu
Rear / Front Curtain synchronization support:
Continuous shooting mode (CL / CH) support:
Switching "TTL / M" underwater:
(+/-) "Flash Exposure compensation" support:
Switching power "ON/OFF":
Battery type:
Current consumption (in standby mode)
Battery capacity (+20°C):
Fiber-optical cable type:
Compatible Electric Bulkheads (optional accessories):
Electric Sync Cord support (Sea&Sea, Ikelite):
Dual Electric Sync Cord support (Sea&Sea, Ikelite):
16034-HSS Optoelectronic TTL Converter
for SEAFROGS underwater photo housings
(housing version with an electric bulkhead on the top)
for SONY A7, A7II, A7III, A7IV cameras
(Firmware: June-2024)
USER'S MANUAL
Inon Z-330, Z-240, S-220, D-200,
Sea&Sea YS-250, YS-D1, YS-D3 Mark II, YS-D3 DUO,
Ikelite Ds-232, DS-230, DS-162, DS-161, DS-160, DS-125,
Subtronic Pro-270, Pro-160 (by electric sync cord),
Retra Pro MAX (including HSS functionality),
Marelux APOLLO-III V2.0, APOLLO-S (including HSS functionality)
613 cores only (Nauticam 26216 / 26217, HowShot 613L, Sea&Sea 50133 / 50128 / 50135)
manual type HSS with Retra and Apollo strobes, - up to 1/8000s
25 000 flashes, 6 months in standby mode
UWTechnics electric bulkheads (Nikonos, Ikelite)
Seafrogs for Sony A7, A7II, A7III, A7IV
1 optical + 1 electrical
automatic by camera command
CR1220 (2pcs.)
0.01 mkA
Sony
1 pc
yes
yes
yes
yes
yes
yes
yes

Advertisement

loading
Need help?

Need help?

Do you have a question about the 16034-HSS and is the answer not in the manual?

Questions and answers

Summary of Contents for UWT 16034-HSS

  • Page 1 16034-HSS Optoelectronic TTL Converter for SEAFROGS underwater photo housings (housing version with an electric bulkhead on the top) for SONY A7, A7II, A7III, A7IV cameras (Firmware: June-2024) USER’S MANUAL Specifications ▪ Compatible photo cameras: Sony ▪ Seafrogs for Sony A7, A7II, A7III, A7IV Compatible underwater housings: ▪...
  • Page 2 Safety Warning for Batteries usage ➢ Use only batteries of the type specified in the Specification. ➢ Batteries must be new and undamaged. Carefully check batteries before usage. ➢ To avoid leakage or explosion, always check appropriate battery terminals position (“plus” terminal up) before installing to the TTL Converter.
  • Page 3 ▪ The 613-core fiber optical cable type is strongly recommended for usage with TTL Converter, to achieve an accurate automatic TTL flash control. TTL Converter is tuned for 613 fiber cable usage only. Other fiber cables have a lower “transmission index” and give a worse exposure in TTL flash control, and even can be totally incompatible. ▪...
  • Page 4 • Note1: Sony camera must be set by menu to the Electronic 1-st curtain shutter type (front e-curtain) for this TTL Converter usage with YS-D3 DUO, because of the processing algorithm inside the YS-D3 DUO strobe. Sony menu setting “mechanical shutter” is not applicable. •...
  • Page 5 In normal operation, TTL +/- Flash exposure compensation adjustment is available for underwater photographer through 2 methods: Using “+/-Ev” dial switch on the underwater strobe body (adjustment works for fiber-optical type connection only). Using camera “Flash Exposure Compensation” function. Such adjustment type is recommended as more accurate, and it works for both types of connection (optical / electric).
  • Page 6 Some manual underwater strobes (like MF-1) requires very strong optical signal for synchronization, this case necessary to set maximum power by this scale (+3 ev): • Special note for YS-D3 DUO strobe usage: TTL Converter’s Flash intensity adjustment by camera controls in this “Controlled Manual mode”...
  • Page 7 ▪ Shutter high speeds for shooting are available in Manual mode of the system (use “WL” command) in range 1/320 ….1/8000 (and faster, dependently of camera model). All model underwater strobes (excluding Retra Pro MAX) in this case don’t produce a flash, automatically via TTL-converter control. Continuous (Serial) Shooting using underwater strobes ▪...