Digi IX15 User Manual page 1004

Command line interface
Command Description
reboot Reboots the IX15 device.
rm
Removes a file.
scp Uses the secure copy protocol (SCP) to transfer files between the IX15 device and a
remote host.
See
show Displays information about the device and the device's configuration.
See
about the show command.
iperf
Perform a speedtest.
ssh
SSH login to a remote server.
system
Issues commands related to system functionality.
tail
Tail a file.
telnet
Telnet login to a remote server.
traceroute
Sends and tracks route packets to a destination host.
xbee XBee commands. See
Note For commands that operate on the IX15's file system, such as the cp, ls, and mkdir commands,
see File system for information about the file system, including how to copy, move and delete files
and directories.
XBee-specific commands
The xbee command includes a set of sub-commands to work with XBee devices from the CLI.
XBee
command Description
XBee network commands to clear, show, and discover the network.
network
See
Reads any parameter from the local XBee—the one in the IX15— or from any remote
get
XBee device in the network.
See
Writes the value of any parameter of the local or any remote XBee device.
set
See
Executes a command in the local XBee device or any remote XBee device in the
execute
network.
See
Updates the local or any remote XBee device with a provided profile.
update
See
Digi IX15 Gateway User Guide
Use the scp command for information about using the scp command.
Display status and statistics using the show command
XBee-specific commands
Manage an XBee network.
Read XBee parameters.
Write XBee parameters.
Execute XBee AT commands.
Apply XBee profiles.
XBee-specific commands
for more information
for more information.
1004