Table of Contents
Advertisement
Delphi NAV300 User's Guide
Tuning TMC
Tap the Tuning button to toggle between Automatic tuning, Hold station, and
Frequency input modes.
In Auto tuning mode, the TMC receiver searches continually for the station that
offers the best reception. The name and frequency of the station are displayed.
Use the arrow keys to select a different station. As soon as another station has
been found, its name and frequency are displayed.
In Hold station mode, the current station is maintained.
In Frequency input mode, you can directly enter a station's frequency. Use the
arrow keys to modify the frequency in steps of 0.1 MHz.
- 52 -
Advertisement
Table of Contents
Need help?
Do you have a question about the NAV300 and is the answer not in the manual?
Questions and answers
How to charge the unit
To charge the Delphi NAV300, connect it to a 12V power jack. The unit will continue charging even when powered down. By default, it will power on when connected to a 12V power source, but this setting can be changed by turning “Auto Booting” to OFF in the Configuration Settings.
This answer is automatically generated