Table of Contents
Advertisement
Section 5
Warning: For your safety, program the Delphi NAV300 and enter your
information about your destination BEFORE you start your journey. Do not
operate the Delphi NAV300 while driving.
Powering Up
Power on
Power off
NOTE: The Delphi NAV300 will continue to charge if connected to a 12V power
jack even when powered down. By default, the unit will power on when
connected to a 12V power source. You can change this setting by turning "Auto
Booting" to OFF in the Configuration Settings (Section 14 of this manual).
Getting Started
Press the Power button located on the
lower left side for at least one second.
Press the Power button located on the
lower left side for at least one second.
- 12 -
Delphi NAV300 User's Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the NAV300 and is the answer not in the manual?
Questions and answers
How to charge the unit
To charge the Delphi NAV300, connect it to a 12V power jack. The unit will continue charging even when powered down. By default, it will power on when connected to a 12V power source, but this setting can be changed by turning “Auto Booting” to OFF in the Configuration Settings.
This answer is automatically generated