Table of Contents
Advertisement
Delphi NAV300 User's Guide
Inserting an SD Card
Delphi NAV300 has a slot for Secure Digital (SD) cards located in the bottom.
Delphi NAV300 will accept SD cards containing digital maps or other data, such
as audio (MP3 or wav) files, movie (avi, MPEG4, Xvid) files, or image (gif, jpg,
png) files.
The Delphi NAV300 comes equipped with an SD card preloaded with USA and
Canada maps. The card will already be in position in the SD card slot, and ready
to use for navigation.
If you choose to use a second SD card (separate purchase required) for music,
movie or picture viewing, remove the navigation system SD card by slightly
pushing the top of the card to release it, then pull it out of the slot.
Make sure the card is not in use before removing it.
Power off the unit, insert the new SD card with the label facing the front of the
device, and power the unit on.
- 13 -
Advertisement
Table of Contents
Need help?
Do you have a question about the NAV300 and is the answer not in the manual?
Questions and answers
How to charge the unit
To charge the Delphi NAV300, connect it to a 12V power jack. The unit will continue charging even when powered down. By default, it will power on when connected to a 12V power source, but this setting can be changed by turning “Auto Booting” to OFF in the Configuration Settings.
This answer is automatically generated