Table of Contents
Advertisement
Section 14:
Delphi NAV300 screen and environment settings can be changed by tapping the
Settings button from the main screen.
Tap to change the
opening screen
from Main Menu to
Navi, Music,
Picture, or Movie
Tap to change the
language used on
the NAV300 screen
Tap to change
screen settings
Settings
Tap to cause the
GPS system to
reset
Tap to cause the
GPS system to
reset
Delphi NAV300 User's Guide
Tap to save your
changes
Tap to save your
changes
- 61 -
Tap to change
configuration
settings
Tap to calibrate the
touch screen
Tap and slide to
change the screen
brightness
Tap to modify the
popup sound
Tap to modify the
button sound
Tap to turn auto
booting on and off
which causes the
unit to power up
whenever it is
connected to a 12v
power source
Advertisement
Table of Contents
Need help?
Do you have a question about the NAV300 and is the answer not in the manual?
Questions and answers
How to charge the unit
To charge the Delphi NAV300, connect it to a 12V power jack. The unit will continue charging even when powered down. By default, it will power on when connected to a 12V power source, but this setting can be changed by turning “Auto Booting” to OFF in the Configuration Settings.
This answer is automatically generated