Table of Contents
Advertisement
Delphi NAV300 User's Guide
Section 6
Navigation Mode
Warning: For your safety, program the Delphi NAV300 and enter
information about your destination BEFORE you start your journey. Do not
operate Delphi NAV300 while driving. Park the vehicle first.
DELPHI DISCLAIMS ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN A
WAY THAT MAY CAUSE ACCIDENTS, DAMAGE OR THAT MAY VIOLATE
THE LAW.
Driver Protection
The driver must not operate this unit while the vehicle is moving. A protection
screen is displayed when the Delphi NAV300 is powered on:
OK must be selected to continue. Selecting Cancel causes the program to
terminate.
- 16 -
Advertisement
Table of Contents
Need help?
Do you have a question about the NAV300 and is the answer not in the manual?
Questions and answers
How to charge the unit
To charge the Delphi NAV300, connect it to a 12V power jack. The unit will continue charging even when powered down. By default, it will power on when connected to a 12V power source, but this setting can be changed by turning “Auto Booting” to OFF in the Configuration Settings.
This answer is automatically generated