Tuning Tmc - Delphi NA20032 - Real-Time Traffic Kit User Manual

You can also adjust your obstacle avoidance status at any time by following these steps:
1. Tap the
icon. The TMC screen appears:
2. Use the
for the obstacle.
3. Tap the Status button and select whether the
selected obstacle is to be Avoided or Ignored.
4. Tap
to update the route, which is recalculated if necessary.
Note: "Dynamic TMC" must be set as the "Type of Routing" under the "Routing Options"
section of Settings.

Tuning TMC

Tap the Tuning button to toggle between Automatic tuning, Hold station, and Frequency
input modes.
In Auto tuning mode, the TMC receiver searches continually for the station that offers the
best reception. The name and frequency of the station are displayed. Use the arrow keys to
select a different station. As soon as another station has been found, its name and frequency
are displayed.
In Hold station mode, the current station is maintained.
In Frequency input mode, you can directly enter a station's frequency. Use the arrow keys to
modify the frequency in steps of 0.1 MHz.
Tap to save your setting and close the TMC screen.
icons to search
1
1