Paper Width (Pagewid); Left-Hand Area (Leftzon) - TallyGenicom LA650 User Manual

User guide

Paper width (Pagewid)

Head up Pagewid
Back Next
1 2 3 4

Left-hand area (Leftzon)

This parameter determines the actual paper width.
Press the Pagewid key (3).
Online
Setup
Setting options: From 20 to 136 in 1/10 inch steps
Default setting: 136/10 Zoll (136 characters at 10 characters/inch)
If Head up = On, the print head moves to the calculated center of
the paper during the time the paper is moving in the protected zone.
If Rightzo = On (see below), the print head moves out of the perfo-
ration zone on the right as long as the paper is being transported.
Set the printing width rather than the actual paper width.
Confirm your settings with the Set key (1) and press the Next key
(4) to access the next group of parameters.
If the parameter is On, the print head moves out of the perforation
zone (area
The Pagewid setting has no influence (see above).
Press the Leftzon key (2).
Setting options: On/Off
Default setting:
Confirm your settings with the Set key (1).
) on the left as long as the paper is being transported.
Off
The Menu
69