Advertisement
USER MANUAL
CLEANLINE Lead Free DZR Brass
(CL, CAP)
•
Basin Set - CLLF10001, CLLF15001,
CAPLF0001
•
Sink Set - CLLF10005, CLLF15005,
CAPLF0005
•
Exposed Mixing Set - CLLF10010,
CLLF15010, CAPLF0010, CLLF10012,
CLLF15012, CAPLF0012, CLLF10015,
CLLF15015, CAPLF0015
•
Recess Mixing Set - CLLF10035,
CLLF15035, CAPLF0035, CLLF10040,
CLLF15040, CAPLF0040
•
Control Valves - CLLF10025PR,
CLLF15025PR, CAPLF0025PR,
CLLF10030PR, CLLF15030PR,
CAPLF0030PR
•
Washing Machine Tap - CLLF10045PR,
CLLF15045PR, CAPLF0045PR
•
Cistern Tap - CLLF10050PR,
CLLF15050PR, CAPLF0050PR
Table of Contents
Scope of Use
Technical Information
Product Images & Technical Drawings
Installation Steps
Water Quality
Cleaning & Maintenance
Troubleshooting
Responsibly Sourced
MAR-IM-CLLF01-JT-20250121
2
2
3
The more
14
stars the more
water ef cient
WATER RATING
22
www.waterrating.gov.au
7.5
22
litres per
minute
24
In accordance with AS/NZS 6400
25
Licence No. 1334
GENTEC AUSTRALIA
gentecaustralia.com.au
The more
stars the more
water ef cient
WATER RATING
www.waterrating.gov.au
6.0
litres per
minute
In accordance with AS/NZS 6400
Lic WMKA25617
Licence No. 1334
SAI Global
GENTEC AUSTRALIA
Last updated in January 2025
AS 3718
Advertisement
Table of Contents
Related Manuals for Gentec CLEANLINE CLLF10001
Summary of Contents for Gentec CLEANLINE CLLF10001
- Page 1 Troubleshooting AS 3718 In accordance with AS/NZS 6400 In accordance with AS/NZS 6400 Responsibly Sourced Lic WMKA25617 Licence No. 1334 Licence No. 1334 SAI Global GENTEC AUSTRALIA GENTEC AUSTRALIA gentecaustralia.com.au MAR-IM-CLLF01-JT-20250121 Last updated in January 2025...
-
Page 2: Scope Of Use
USER MANUAL Scope of Use Installation of all products should adhere to the manufacturer's guidelines, as well as comply with PCA, AS/NZS3500 standards, and any other relevant regulatory provisions. This product range complies with the Lead Free requirements of the National Construction Code Volume Three. - Page 3 Basin Set with 114mm Curved Fixed Spout and 100mm 6, 20 -28 Ricketty St www.gentecaustralia.com.au Mascot, NSW 2020 info@gentecaustralia.com.au Lever Handles This drawing is property of Cleanline Gentec Australia Pty Ltd 13/01/20 1 : 2 DRA-MAR-LD-CL01-MB-130120 Ø40 Ø19 Ø34 Ø52 Ø32...
- Page 4 Mascot, NSW 2020 info@gentecaustralia.com .au Curved Swivel Spout and 100m m Lever Handles This drawing is property of PRODUCT RANGE LAST UPDATE APPROVED BY Cleanline Gentec Australia Pty Ltd 02/ 05/ 2024 1 : 2 DRA-MAR-LD-CL01-MB-130120 SCALE Ø40 Ø34 Ø52 Ø32...
- Page 5 165mm Curved Swivel Spout and 100mm Lever Handles Lead Free DZR Brass Wall Mounted 100mm Lever Exposed Mixing Set w/ Gooseneck PRODUCT RANGE This drawing is property of LAST UPDATE APPROVED BY Cleanline Gentec Australia Pty Ltd 02/05/2024 1 : 3 DRA-MAR-LD-CL01-MB-130120 SCALE Swivel Spout Ø19 Ø40...
- Page 6 .au 165m m Fixed Parallel Spout and 100m m Handles. Spout PRODUCT RANGE This drawing is property of LAST UPDATE APPROVED BY Cleanline Gentec Australia Pty Ltd 02/ 05/ 2024 1 : 3 DRA-MAR-LD-CL01-MB-130120 SCALE Ø40 80.5 245.5 CLLF15012 Ø40...
- Page 7 6, 20 -28 Ricketty St www.gentecaustralia.com .au Mascot, NSW 2020 info@gentecaustralia.com .au 100m m Lever Handles Spout This drawing is property of LAST UPDATE APPROVED BY Gentec Australia Pty Ltd 02/ 05/ 2024 DRA-MAR-LD-CL01-MB-130120 Ø19 Ø40 Ø30 Ø48 G1/2 CLLF15015...
- Page 8 DATE REV. DESCRIPTION PRODUCT RANGE: SIZE: Mascot, NSW 2020 info@gentecaustralia.com.au This drawing is the property of CLEANLINE Gentec Australia Pty Ltd Third Angle Projection AS-1100 LAST UPDATE APPROVED BY MATERIAL: SCALE: All dimensions are in mm unless specified 02/05/2024 and are to be used as a guide only FINISH: Ø19...
- Page 9 DATE DESCRIPTION PRODUCT RANGE: SIZE: Mascot, NSW 2020 info@gentecaustralia.com.au This drawing is the property of 193.5 CLEANLINE Gentec Australia Pty Ltd Third Angle Projection AS-1100 43.5 LAST UPDATE APPROVED BY MATERIAL: SCALE: LF Brass All dimensions are in mm unless specified...
- Page 10 Lead Free Brass Wall Mounted Control Valve - 6, 20 -28 Ricketty St www.gentecaustralia.com.au Mascot, NSW 2020 info@gentecaustralia.com.au Hot 7 Cold with 100mm Lever Handle This drawing is property of Gentec Australia Pty Ltd Cleanline 02/05/2024 1 : 2 DRA-MAR-LD-CL01-MB-130120 Ø40 Ø35 Ø65...
- Page 11 Mascot, NSW 2020 info@gentecaustralia.com .au with 100mm Lever Handles - 1 Pair Hot & Col PRODUCT RANGE This drawing is property of LAST UPDATE APPROVED BY Cleanli Gentec Australia Pty Ltd 02/ 05/ 2024 1 : 2 DRA-MAR-LD-CL01-MB-130120 SCALE Ø40 Ø34 Ø52...
- Page 12 DATE REV. DESCRIPTION PRODUCT RANGE: Mascot, NSW 2020 info@gentecaustralia.com.au This drawing is the property of CLEANLINE Gentec Australia Pty Ltd Third Angle P AS-11 LAST UPDATE APPROVED BY MATERIAL: LF Brass All dimensions are in mm unless specified 06/05/2024...
- Page 13 REV. DATE DESCRIPTION PRODUCT RANGE: SIZE: Mascot, NSW 2020 info@gentecaustralia.com.au This drawing is the property of CLEANLINE Gentec Australia Pty Ltd Third Angle Projection AS-1100 LAST UPDATE APPROVED BY MATERIAL: SCALE: LF Brass All dimensions are in mm unless specified...
- Page 14 Dismantling of the internal parts of the tap set is not recommended. LEVER ACTION TAPWARES without clarification with Gentec. Gentec reserves the right to make design changes at any time without notification. catridge into t *WARRANTY TERMS AND CONDITIONS, please refer to www.gentecaustralia.com.au/page/terms_and_conditions the desired the seat.
- Page 15 CLLF10001, CLLF15001, CAPLF0001, CLLF10005, CLLF15005, CAPLF0005 INSTALLATION STEPS Step 1. Ensure the dimensions distances Step 7. Attach brass lock nut and nylon for 3 tap hole set. washer from top side, adjust and tighten. Step 2. Ensure hot and cold side Step 8.
- Page 16 Mascot, NSW 2020 PRODUCT RANGE LAST UPDATE APPROVED BY This drawing is property All dimensions are in mm unless of Gentec Australia Pty Ltd pecified and are to be used as SCALE a guide only PRODUCT CODE AND DESCRIPTION www.gentecaustralia.com.au...
- Page 17 Screw and tighten the breech set. www.gentecaustralia.com.au 6,20-28 Ricketty St info@gentecaustralia.com.au Mascot, NSW 2020 LAST UPDATE APPROVED BY This drawing All dimensions are in mm unless of Gentec Au specified and are to be used as a guide only gentecaustralia.com.au...
- Page 18 PRODUCT CODE AND DESCRIPTION www.gentecaustralia.com.au 6,20-28 Ricketty St Mascot, NSW 2020 info@gentecaustralia.com.au PRODUCT RANGE LAST UPDATE APPROVED BY This drawing is property are in mm unless of Gentec Australia Pty Ltd re to be used as SCALE...
- Page 19 6,20-28 Ricketty St Mascot, NSW 2020 info@gentecaustralia.com.au LAST UPDATE APPROVED BY PRODUCT RANGE This drawing is property All dimensions are in mm unless of Gentec Australia Pty Ltd specified and are to be used as a guide only SCALE gentecaustralia.com.au...
- Page 20 PRODU 6,20-28 Ricketty St www.gentecaustralia.com.au Mascot, NSW 2020 info@gentecaustralia.com.au LAST UPDATE APPROVED BY This drawing is pro All dimensions are in mm unless of Gentec Australia specified and are to be used as a guide only...
- Page 21 CLLF10045PR, CLLF15045PR, CAPLF0045PR, CLLF10050PR, CLLF15050PR, CAPLF0050PR INSTALLATION STEPS Step 1. Apply adequate thread tape to Step 4. Turn on water supply, check for wall fitting. leaks and verify operation. Step 2. Place cover flange and screw on Step 5. Screw on washers and screws the valve (ensure direction of to the handle and place the outlet) and hot and cold valve.
-
Page 22: Water Quality
Cleaning & Maintenance To minimise downtime and maximise the functional life of the product, GENTEC recommends servicing your product at least every 12 months, under heavy use may need to be checked and serviced more often. - Page 23 Spare Parts Code Name Components Included Dress Flange to suit cleanline adaptors CL9010 1 x Dress Flange (C025) 1 x Push in Tee CL9100 Push In Tee to Suit C002 2 x O-Rings 1 x Hose CLS9052 CLEANLINE Spout Hose Tap Adaptor 1 x O-Ring CLEANLINE Capstan handles only Handle...
-
Page 24: Troubleshooting
USER MANUAL Troubleshooting Problem Cause How to Fix • Have you flushed the water line for a minimum of 1 minute before connecting the water • Have you installed the strainer and flow controller if provided • If debris has gone through the cartridge this •... - Page 25 GENTEC is rejuvenating the product- no power, less maintenance and longer life. Rejuvenation Program To learn more about the rejuvenation program, please contact our customer service at info@gentecaustralia.com.au for more information. Ethically and Environmentally Sourced Please refer to GENTEC Business Ethics & Ethical Sourcing Policy at https:// gentecaustralia.com.au/terms-and-conditions/ gentecaustralia.com.au...
- Page 26 Note: The information provided is only a guide, actual product may differ. The information here should not be relied on without clarification with Gentec. Gentec reserves the right to make design changes at any time without notification.
Need help?
Do you have a question about the CLEANLINE CLLF10001 and is the answer not in the manual?
Questions and answers