Flash Applications - Texas Instruments TI-89 Manual Book

Flash Applications

Applications
Hardware/Software
Requirements
Hardware Setup for
the Computer
Installing a Flash
Application from the
CD-ROM
Note: For further
information about
transmitting applications to
and from your computer
using TI Connect, refer to
the TI Connect online help.
Running a Flash
Application
x
Flash functionality enables the ability to download different
applications to a
TI-89 / TI-92 Plus
CD-ROM, the TI web site, or from another calculator.
Before downloading new applications to a
read and accept the license agreement on the
Applications CD-ROM.
Before installing Flash applications, you will need:
A computer with a CD-ROM drive and a serial port.
or
TI™ Connect TI-GRAPH LINK™
cable. If you need the
cable, check the TI web site at
TI-GRAPH LINK
To set up:
1. Insert the small end of the
the bottom of the
TI-89
2. Connect the other end to the computer's serial port using a
25-to-9 pin adapter if necessary.
To install an application:
1. Insert the
TI-89 / TI-92 Plus
computer's CD-ROM drive.
2. From the computer, start the
3. From the menu, click
Link
.
Certificates
4. Locate the Flash application on the CD-ROM and double-click.
The Flash application is copied to the calculator.
To run an application:
1. On the
TI-89 / TI-92 Plus
menu.
APPLICATIONS
2. Use the cursor keys CD to highlight the application and press
¸.
calculator from the enclosed
TI-89 / TI-92 Plus
TI-89 / TI-92 Plus
software and a
TI Connect/ TI-GRAPH LINK
cable into the port at
TI-GRAPH LINK
or the top of the
TI-92 Plus
Applications CD-ROM into the
TI-GRAPH LINK
Send Flash Software 8 Applications and
, press ¥ O to display the
, please
TI-GRAPH LINK
software or a
.
education.ti.com
.
software.
FLASH